- 5,259
- 3,971
- 113
- Location
- Charleston, WV
The motor bracket (P/N# 12276904) is busted on my 925A2. It is what mounts the hydraulic motor to the winch. It is aluminum so it didn't hold up really well to what ever the SeaBee guys ran over. I haven't been able to find one used yet. All of the yards I have called have one, but they are broken too! LOL.
I was able to track down one of the contractors that makes them for the military. They want $199 for a new. If I buy 6, I can get them for $175/piece. The hard part is finding 5 more people with broken brackets!
I hate to pay that much for one even if it is a freshly machined piece. The guys in the machine shop at my brother's plant might be able to fab one out of steel with the specifications on hand.
Here's what the spec's say:
ALUMINUM MATERIAL; CYLINTRICAL SHAPED ITEM,FLANGED ON BOTH ENDS; 1 FLANGE 1.060 IN. THK; OPPOSITE END FLANGE 0.620 IN. THK; BOTH FLANGE DIAMETERS 6.120; 4 HOLES EACH FLANGE ON 5.000 IN. BOLT HOLE DIA; 4 PLAIN HOLES ONE END0.531 IN. DIA,4 THREADED HOLES
OPPOSITE END 9/16-18 UNF-2B; 4.820 IN. O/A LENGTH; CENTER BODY LENGTH 2.880 INS LG,3.680 IN. DIA; STEPPED CENTER APPERTURE WITH 2.812 IN. DIA THROUGH
Thoughts? Anyone seen one? 54reo?![Smile :) :)](data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7)
I was able to track down one of the contractors that makes them for the military. They want $199 for a new. If I buy 6, I can get them for $175/piece. The hard part is finding 5 more people with broken brackets!
I hate to pay that much for one even if it is a freshly machined piece. The guys in the machine shop at my brother's plant might be able to fab one out of steel with the specifications on hand.
Here's what the spec's say:
ALUMINUM MATERIAL; CYLINTRICAL SHAPED ITEM,FLANGED ON BOTH ENDS; 1 FLANGE 1.060 IN. THK; OPPOSITE END FLANGE 0.620 IN. THK; BOTH FLANGE DIAMETERS 6.120; 4 HOLES EACH FLANGE ON 5.000 IN. BOLT HOLE DIA; 4 PLAIN HOLES ONE END0.531 IN. DIA,4 THREADED HOLES
OPPOSITE END 9/16-18 UNF-2B; 4.820 IN. O/A LENGTH; CENTER BODY LENGTH 2.880 INS LG,3.680 IN. DIA; STEPPED CENTER APPERTURE WITH 2.812 IN. DIA THROUGH
Thoughts? Anyone seen one? 54reo?
Attachments
-
38.6 KB Views: 54