MEP-802/803 relays

[Daybreak]

Howdy,
Both the MEP-802A and MEP-803A use the same relays.

The relay are all the same, EXCEPT, the one on the far left. It is SPECIAL.

 

[Guyfang]

All the TQG's use the same relays. 5 KW to 60 KW.

 

[Hard Head]

Howdy,
Both the MEP-802A and MEP-803A use the same relays.

The relay are all the same, EXCEPT, the one on the far left. It is SPECIAL.

View attachment 683555

View attachment 683556

View attachment 683557

I got in a several Tier reset generator from the Army with these relays.

 

[Guyfang]

They, the new ones, are nicer because you can see the red flag move when the relay opens or closes. Don't know if the relay itself is better, but I never had many relays go bad anyway. A few, but on the whole, they were not a problem. The few I found, I always used for training aides.

 

[Daybreak]

Howdy,

Yes, the farthest left piece is actually a switch. That is the pricey one $$

 

[nextalcupfan]

Does anyone have a part # for the "new" relays put in with a reset? (The ones with the flags) I would like to keep 1 on hand as a backup but cant see a # for the ones Hard Head posted.
I found an Omron Relay (Omron MJN2CF-DC24) that should work but I want to search the "new" relays before I purchase anything.
(P.S. I looked up the Potter & Brumfield ones, I can get one easily but they are made in China now while my originals were made in Mexico. I would prefer not China if at all possible)

 

[maniatopoulosg]

Howdy,

Yes, the farthest left piece is actually a switch. That is the pricey one $$

Does anyone stock theses ?


Sent from my iPhone using Tapatalk

 

[Guyfang]

Send Kurt a PM.

 

[Light in the Dark]

Does anyone stock theses ?


Sent from my iPhone using Tapatalk

Kurt Kloppk has come out with an upgraded version. The OEM is still available through Quantum Controls, but Kurt has one now too.

 

[kloppk]

I have lots of the leftmost "relay" (S14) available.
S14 Frequency Trip Switch "Relay"
I also have some of the other relays in the relay row too. New.

 

[Waukesha]

I have lots of the leftmost "relay" (S14) available.
S14 Frequency Trip Switch "Relay"
I also have some of the other relays in the relay row too. New.

Ordered both. Thank you, Kurt!

 

[kloppk]

Shipped!

 

[Strike Fighter]

I have lots of the leftmost "relay" (S14) available.
S14 Frequency Trip Switch "Relay"
I also have some of the other relays in the relay row too. New.

Hi , Does the S14 relay have anything to do with a 803-A only clicking and not cranking from the S1 switch ?

 

[kloppk]

It's possible. S14 is used for disabling the starter and flashing of the gen head.
Best to refer to the -24 TM and use the troubleshooting steps for engine not cranking. Could be a few culprits in the circuit causing a no crank situation.

 

[Strike Fighter]

Hi , Does the S14 relay have anything to do with a 803-A only clicking and not cranking from the S1 switch ?

Thanks for the reply , You do have S14 relay correct how much is it ?

 

[kloppk]

I have them listed in the Classifieds ---> S14