Me too! hahaha.. Stoked that it was just that and nothing bigger for sure. Ready for hurricane season without having to have battery chargers hooked up to the gen set.
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
MEP-802a Low Alternator Voltage Output
- Thread starter ethernaut85
- Start date
- 549
- 1,039
- 93
- Location
- Cool, CA
I know, old thread but mine is having the same issues. Was the fuse LITD mentioned the added fuse on the back wall or is there one right behind the guage panel I missed?
- 16,573
- 23,622
- 113
- Location
- Burgkunstadt, Germany
I know, old thread but mine is having the same issues. Was the fuse LITD mentioned the added fuse on the back wall, (No) or is there one right behind the guage panel I missed? (Yes. its labeled FU1)
Perhaps you need to read the operators manual? Have you down loaded the TM's, They are here: https://www.steelsoldiers.com/threads/all-the-tms-needed-for-the-mep-803a.213028/
Why don't you start your own thread, so we can help you. Every problem is not the same.
Perhaps you need to read the operators manual? Have you down loaded the TM's, They are here: https://www.steelsoldiers.com/threads/all-the-tms-needed-for-the-mep-803a.213028/
Why don't you start your own thread, so we can help you. Every problem is not the same.