• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

MEP 805B 806B screen dim/bright tool build

K

kloppk

Well-known member
Steel Soldiers Supporter
2,145
3,526
113
Location
Pepperell, Massachusetts
They are built following the MCII Inc drawing number 29763.
I added potting inside of the shrink tubing on the switch to prevent the cable from flexing to eliminate the wires from breaking.

The picture below is the cable assembly minus the back shell for the 100 pin SCSI connector.
(The back shells are due in this Friday)
CIM Cable Minus Back Shell.jpg
 
You must log in or register to reply here.
110,897members
165,315threads
2,326,244posts
1,522online users
Top
✖
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks