Hello all. I am having a few issues with my gen set.
When I start the gen, I will get a 'under voltage ' light. Someone has messed with the k5 relay before, it was not bolted to the base and loosely in there.
![IMG_9776.JPG IMG_9776.JPG](https://www.steelsoldiers.com/data/attachments/556/556496-084ccf60c5d06e8e4c1f8d267067a7eb.jpg)
They may have replaced it or put a faulty one in.
I cheched the magnetic sensor on the bell housing and it checks out ok.
This morning I checked the fuse in the control box and I thought it was ok.
This evening I checked again and it was open. So I have to replace it. i think it is a 3 amp fuse but not sure I cant see any writing on it.
![IMG_9779.JPG IMG_9779.JPG](https://www.steelsoldiers.com/data/attachments/556/556498-89d753601faa42b8b2f827ab9d84a810.jpg)
Can someone verify the value?
![IMG_9778.JPG IMG_9778.JPG](https://www.steelsoldiers.com/data/attachments/556/556497-25c5871b8120efba6df74ec01dfd6490.jpg)
When I start the gen, I will get a 'under voltage ' light. Someone has messed with the k5 relay before, it was not bolted to the base and loosely in there.
![IMG_9776.JPG IMG_9776.JPG](https://www.steelsoldiers.com/data/attachments/556/556496-084ccf60c5d06e8e4c1f8d267067a7eb.jpg)
They may have replaced it or put a faulty one in.
I cheched the magnetic sensor on the bell housing and it checks out ok.
This morning I checked the fuse in the control box and I thought it was ok.
This evening I checked again and it was open. So I have to replace it. i think it is a 3 amp fuse but not sure I cant see any writing on it.
![IMG_9779.JPG IMG_9779.JPG](https://www.steelsoldiers.com/data/attachments/556/556498-89d753601faa42b8b2f827ab9d84a810.jpg)
Can someone verify the value?
![IMG_9778.JPG IMG_9778.JPG](https://www.steelsoldiers.com/data/attachments/556/556497-25c5871b8120efba6df74ec01dfd6490.jpg)