Miltope laptop question

[319cssb]

could someone look and check and post the part number of the connector that goes to the power input of the laptop? I bought a charger unit, but it doesn't hooch on account that it has the wrong connector. My connector male connector on the laptop has 4 pins. Would you know the pin out maybe too?
thank you.
I also need to source an serial cable that goes between the ICE BOX and the laptop. Part Numero for that device is #1308011.
thank you all in advance.

 

[papakb]

If you want an accurate matching plug you should post a picture with your request, preferably one with a ruler alongside the connector. This will eliminate a lot of guesswork.

 

[319cssb]

If you want an accurate matching plug you should post a picture with your request, preferably one with a ruler alongside the connector. This will eliminate a lot of guesswork.

the Issue I am having is that I don't have the plug. So I can't post a picture of it. There is just one connector plug that plugs into the Miltope Laptop on the power supply brick

 

[papakb]

Can you post a picture of that so we know what we're trying to mate with?

 

[319cssb]

 

[papakb]

The connector you want is an MS3476(x)14-4S. The original is an MS3475W14-4s that has extra grounding contacts that aren't necessary but will run the cost up. The (x) will be either an L,A, or W. L is a nickel finish, A is a black finish, and W is an OD finish. Search around a bit and you can find them at reasonable prices.

Kurt
KG6KMJ

 

[319cssb]

I am getting this messages when I connect the MSD ice box to the Miltope.
Does anyone know why and how I can fix it?

 

[Crazyguyla]

I am getting this messages when I connect the MSD ice box to the Miltope.
Does anyone know why and how I can fix it?
View attachment 713488

It's been a long time since I've messed with one, but here's a link to check out: https://www.steelsoldiers.com/showthread.php?167659-MSD-ICE-Kit-Diagnostics

Marcus