Well finally started to warm up and no rain for a few days so I figured I might as well get a couple of the mods I wanted to do out of the way while I had some free time this past weekend. First off I pulled the cargo cover off and stored the bows & uprights in prep for the truck to be used as part of a stage. Then I put my new 5" Donaldson ram air intake on (also have one for the 923). Then I decided I wanted to get started on the (3) Air Ride seats so I put my two group 31 batteries for 24v and the one good 6TL I had for 12v down into the toolbox under the passenger side door. The Power Distribution box with the circuit breakers/fuses fit in the last little bit of space so I am happy! Used the treated wood blocks from the original box to make my spacers and then used all-thread & some uni-strut I had left over from another project to make my tie-downs. (Still need to finish tidying up the solar charger/Power distribution wiring as well as the backup & forward camera wires once the new seating is completed. Now to go find a 22" x 42" x 1/4" piece of steel to use as the base plate for the two seats that will replace where the OEM battery box/bench seat was.
![20160503_120218.jpg 20160503_120218.jpg](https://www.steelsoldiers.com/data/attachments/423/423863-64ea6ddfada725dfa7a1c3d643e3db6f.jpg)
More to come as things progress!
![IMG_0445.jpg IMG_0445.jpg](https://www.steelsoldiers.com/data/attachments/423/423866-6706887c31205e93f29dea05cbdf4bdd.jpg)
![20160503_120236.jpg 20160503_120236.jpg](https://www.steelsoldiers.com/data/attachments/423/423864-f909bc1efc1204ce78eaeac084c57aa8.jpg)
![20160503_120238.jpg 20160503_120238.jpg](https://www.steelsoldiers.com/data/attachments/423/423865-d20f483134c96399a04ecc0203215cb0.jpg)
![20160503_120218.jpg 20160503_120218.jpg](https://www.steelsoldiers.com/data/attachments/423/423863-64ea6ddfada725dfa7a1c3d643e3db6f.jpg)
More to come as things progress!