Moving truck from CA to NC - Help.

[PowerstrokeNC]

I wanted to see if anybody had an underground railroad way of getting some iron from one coast to the other? This would be cost prohibitive endeavor shipping with a commercial contractor so I am looking at other possible options if there are any.....

thanks for the help.

Truck is a 915.

 

[73m819]

I WILL drive it

 

[CBR Metalworks]

What is it with people in Greensboro wanting to buy trucks from CA? A friend just bought a HET from CA a couple weeks ago. If a 915 and a HET would fit on one trailer I would say yall should talk but I highly doubt they would.

 

[PowerstrokeNC]

What is it with people in Greensboro wanting to buy trucks from CA? A friend just bought a HET from CA a couple weeks ago. If a 915 and a HET would fit on one trailer I would say yall should talk but I highly doubt they would.

Tell me about it! Lol maybe we could strap the 915 on the back of the HET or piggy back them like the truck companies do.

 

[PowerstrokeNC]

I WILL drive it

Might be an option you going to be out there?

 

[M35A2-AZ]

I do not think a Het and a M915 will fit. the Het is over 40,000lbs.
That will be a long drive at 45mph in the Het, LOL. I drove one about 500miles with
Castle Bravo and that was a long 12 hours.

 

[VPed]

That will be a long drive at 45mph in the Het, LOL. I drove one about 500miles with
Castle Bravo and that was a long 12 hours.

How bout you drive it for him from CA to Tonopah, then see if 1954 COE will drive it from there to El Paso. I would drive it to Austin. Heck that's half way there.

 

[M35A2-AZ]

How bout you drive it for him from CA to Tonopah, then see if 1954 COE will drive it from there to El Paso. I would drive it to Austin. Heck that's half way there.

LOL!!!! Maybe

 

[PowerstrokeNC]

Its getting closer

 

[PowerstrokeNC]

if the HET is being driven then could we tow bar the 915 back?

 

[wreckerman893]

if the HET is being driven then could we tow bar the 915 back?

Now there's an idea. Still a slow go at 45 MPH. Ron is the man for the job to drive it back.

 

[CARNAC]

If I was bringing it east, I'd need a trailer behind it.

 

[CBR Metalworks]

if the HET is being driven then could we tow bar the 915 back?

The buyer of the HET might would entertain that. He had originally thought about driving it back. He is thinking/hoping he can find a trucking company to haul the HET back for about $5000-5500

 

[wreckerman893]

The buyer of the HET might would entertain that. He had originally thought about driving it back. He is thinking/hoping he can find a trucking company to haul the HET back for about $5000-5500

Finding a RGN in CA that needs a backhaul to NC is going to be difficult. RGN's typically charge 3 bucks or better per mile plus there may be some permitting in some states. PM me for Stanley's number at Landstar. He has helped me out in the past, has always did what he promised and is now a member of the M936 club here.

 

[PowerstrokeNC]

The buyer of the HET might would entertain that. He had originally thought about driving it back. He is thinking/hoping he can find a trucking company to haul the HET back for about $5000-5500

Ron is very reasonable, for the kind of money that i am seeing for trucking it, rolling the HET/915 wheels down would be cheaper if I shared in my portion of the expenses to hitch a ride!