abfisher1798
Active member
- 189
- 87
- 28
- Location
- Blythe, California
Does anyone have a lead on a set of front fenders that bolt to the cab?
Has anyone tried aftermarket options?
Thanks!
Has anyone tried aftermarket options?
Thanks!
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
MTVR cab fenders
- Thread starter abfisher1798
- Start date
TacMac2012
Active member
- 182
- 135
- 43
- Location
- Wallburg, NC
Those definitely could have been designed better. Seems the pretty commonly crack right in the middle.
abfisher1798
Active member
- 189
- 87
- 28
- Location
- Blythe, California
I agree. I’m sure there’s an aftermarket option that fits well enough out there. Just need to find it.
- 1,117
- 1,054
- 113
- Location
- Perry, FL
I doubt that. Perhaps some fiberglass ones could be molded using a pair that hasn't cracked yet. I have a friend here that builds hard tops for boats. I'll ask him about it. Mine is cracking on one side too.
- 1,117
- 1,054
- 113
- Location
- Perry, FL
Probably cost 1200.00 per side.....
abfisher1798
Active member
- 189
- 87
- 28
- Location
- Blythe, California
- 1,117
- 1,054
- 113
- Location
- Perry, FL
abfisher1798
Active member
- 189
- 87
- 28
- Location
- Blythe, California
Yes, but I have an idea.
Getting them from the factory?
If I can use the new fenders to create a build file for a 3D printer, maybe I can come up with a cheaper alternative to OEM.
Need to do some homework. I think the size is an issue, might figure out a way to print a fender in two or more sections at a time.
10isBestmm
Member
- 52
- 47
- 18
- Location
- San Antonio, Texas
Might be easier to take a fender to a aluminum or sheetmetal workshop and made up instead of whatever the hell the current ones are made of
10isBestmm
Member
- 52
- 47
- 18
- Location
- San Antonio, Texas
And make it strong enough to accidently stand on like the old 5 tons
People always want to grab mine when climbing under the hood and it infuriates me knowing it’s nearly unobtanium or insanely overpriced
Sent from my iPhone using Tapatalk
rockertype
Member
- 30
- 28
- 18
- Location
- PA
"UNOBTANIUM" - Love it!
- 7,771
- 19,877
- 113
- Location
- Charlotte NC
.
Yes Sir. Popular for things like the outrigger pads or the remote controls for the M-1089. Every now and again something falls out of the pipeline, but the vendor that manufacturer used to build the cranes mostly ignore us.
Definitely a good term though!
TacMac2012
Active member
- 182
- 135
- 43
- Location
- Wallburg, NC
Jeez $500 each I'd have sold some for that much!
rockertype
Member
- 30
- 28
- 18
- Location
- PA
$596.30 a side now! LOL