- 537
- 42
- 28
- Location
- Custer, South Dakota/Black Hills
I picked up a 1968 Bayfield M274A5 with a parts engine included on the 1st of May. Did not want any more projects but the price was right so I am in the middle of another project. It is in pretty good shape as far as old mules go. Took deck off to make for easy access. Missing some expensive parts but the project is coming along. Engine did not run but after a new Carb/fuel pump and most important correct timing it runs like rabbit. Next was the overhaul of the brake system as it was frozen solid. Then on to the tranny which was also frozen solid. Then added a temporary wooden deck to do a driving check to check for leaks and correct operation. Added electric start. Found some leaks which are now repaired.
Bought a used basket and added all the items that go into it. All needed parts I am getting from John Emery. Very good guy to deal with. The last mule I did I got all my parts from Bill Watson and he was another very good person. At this time I still need a rear cage, engine deck cover, new rails, passenger foot basket, and 106 deck hole cover, And Seats... 2 each as this unit will be a two seater the same as the last one I restored. Wish I would have kept some of the parts of the 6 mules I sold to a guy in ND a few years ago.
hndrsonj picked up the deck today and the 4 wheels/rims and is taking them to Cheyenne for blasting. By next weekend I should have the frame etc. cleaned/stripped/ painted and will go to Cheyenne and pick up the deck and wheels. Paint them and start installing deck/frame etc. This will be a motor pool resto.
The two seater I did a few years ago is pictured and this one will look just like it when I am done with this project. I hope...
Here are some pics of the progress.
Bought a used basket and added all the items that go into it. All needed parts I am getting from John Emery. Very good guy to deal with. The last mule I did I got all my parts from Bill Watson and he was another very good person. At this time I still need a rear cage, engine deck cover, new rails, passenger foot basket, and 106 deck hole cover, And Seats... 2 each as this unit will be a two seater the same as the last one I restored. Wish I would have kept some of the parts of the 6 mules I sold to a guy in ND a few years ago.
hndrsonj picked up the deck today and the 4 wheels/rims and is taking them to Cheyenne for blasting. By next weekend I should have the frame etc. cleaned/stripped/ painted and will go to Cheyenne and pick up the deck and wheels. Paint them and start installing deck/frame etc. This will be a motor pool resto.
The two seater I did a few years ago is pictured and this one will look just like it when I am done with this project. I hope...
Here are some pics of the progress.
Attachments
-
73.1 KB Views: 77
-
58.7 KB Views: 75
-
69.1 KB Views: 70
-
59.4 KB Views: 76
-
99.1 KB Views: 96
Last edited: