army_nurse
Member
- 203
- 1
- 18
- Location
- Fort Gibson Oklahoma
Well its not od green or tan (yet) but i picked this up super cheap. I have replaced all the breaks, switched to a 258 intake and exhaust manifold and a motorcraft 2100 carb, fixed the electrical, and lifted the rear and soon to lift the front. I will be switching it over to right hand drive and adding a bigger alternator and 2 5kw ac/dc converters. it will get 235/85r16 tires with 2 inch spacers and a rapco tan paint job. as well as a roll bar. i will be coating the underside with por 15. i have a good start but the difficulty i have is the doors i think that hmmwv doors will work but one i need the measurments on the doors. (i have looked and cant find them, and 2. i need to source some place to find the doors. with any luck i can find 2 tan front doors i think that will be the closest fit. any help you can send my would be great and mods i couldnt find any other place that this seemed to fit.
Attachments
-
64.8 KB Views: 113
-
92.9 KB Views: 99
-
73.3 KB Views: 103