-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
My first multifuel?
- Thread starter foxtrot
- Start date
- 2,677
- 8,649
- 113
- Location
- Alexandria, La
First suggestion (as someone who has recovered MVs from the current state of yours):
Long pants and a weedeater!
Here was my M37 when I first saw her...
On a serious note, clear all of the growth as much as you can before trying to move her... you have no idea what's under and inside her..... you may scare out various critters, creepy-crawlies and nope ropes...
Have fun, take your time and appreciate your beauty!
Not much of a multifuel 5 ton guy, my experience is with the White in the deuces. Good luck!
Long pants and a weedeater!
Here was my M37 when I first saw her...
On a serious note, clear all of the growth as much as you can before trying to move her... you have no idea what's under and inside her..... you may scare out various critters, creepy-crawlies and nope ropes...
Have fun, take your time and appreciate your beauty!
Not much of a multifuel 5 ton guy, my experience is with the White in the deuces. Good luck!
M35fan
Well-known member
- 1,166
- 3,992
- 113
- Location
- Arab, Alabama
I am not a 5 ton expert by any means, but I see a lot of work needed and a lot of potential. Apparently it has been sitting for a while. Do you know anything about its past?
Also, Ken: "nope ropes"?
first time I've heard em called that. I'm gonna use it.
Also, Ken: "nope ropes"?
first time I've heard em called that. I'm gonna use it.
dmetalmiki
Well-known member
- 5,523
- 2,028
- 113
- Location
- London England
YES..but but but..but.. Yours 'looks like' it just came out of (OK going in to then!) the "showroom"..
dmetalmiki
Well-known member
- 5,523
- 2,028
- 113
- Location
- London England
That's a LOT of cleaning and removing of rust etc.
L O T S of dismantlement cleaning repairing and replacing.
Lots of care BEFORE using the brakes (Towing) and or moving.
(As, once on (IF they come on they will most likely STAY on!.))
ALL the wiring..and electric...'things'..
A NEW winch rope..
Great......errrr....Weekend project.
L O T S of dismantlement cleaning repairing and replacing.
Lots of care BEFORE using the brakes (Towing) and or moving.
(As, once on (IF they come on they will most likely STAY on!.))
ALL the wiring..and electric...'things'..
A NEW winch rope..
Great......errrr....Weekend project.
HDN
Well-known member
- 2,112
- 5,088
- 113
- Location
- Finger Lakes Region, NY
Were wreckers the only trucks with the extra marker light on the driverside fender? I'm thinking that might've been an M62A2.
Also, what's with the rest of the marker lights? Is that a European retrofit?
That looks like it's going to be a ton of work. "Ran when parked in the brush" is likely going to be a difficult project, unless you're really up to it! It reminds me of a tractor wrecker I looked at locally that had the same story, except it had all its wrecking gear.
Also, what's with the rest of the marker lights? Is that a European retrofit?
That looks like it's going to be a ton of work. "Ran when parked in the brush" is likely going to be a difficult project, unless you're really up to it! It reminds me of a tractor wrecker I looked at locally that had the same story, except it had all its wrecking gear.
- 2,677
- 8,649
- 113
- Location
- Alexandria, La
Looking at the dash, it has the warning about putting the transmission in 4th or 5th speed before using the crane and winches.. so it very well may have been a wrecker... I don't know enough about the wreckers to say... maybe @m715mike would know... I hear he has an 800 series wrecker.... pretty sure @Csm Davis could maybe shed some light too...
m715mike
Well-known member
- 2,797
- 3,823
- 113
- Location
- Montgomery, Texas
Sorry, I’m not much help. Mine is a M936A2.
- 10,467
- 6,551
- 113
- Location
- Camp Wood/LC, TX
Definitely was a wrecker, only wreckers had the Mico brake lock and the rear facing transfer PTO. Also the level wind on the winch is a wrecker thing.
SCSG-G4
PSVB 3003
- 5,370
- 3,383
- 113
- Location
- Lexington, South Carolina
The MICO brake lock is kind of a strange creature. When you apply it, don't try to put your foot through the floor on the break pedal. Use just enough force to keep the truck still, press the push button and take your foot off the break pedal. When you go to move the truck, you MUST press the brake pedal HARDER to disengage the MICO brake lock valve. If you messed up, then you will have to open up one of the bleed valves on one of the rear wheels just enough to relieve the pressure in the rear set of brakes Unless you are on very level ground, chocking the wheels is advised as the first step. That brake lock valve is actually a disc that floats back and forth in the brake line (inside a chamber of course) that is magnetic. When you press the brake pedal the DOT-5 flows back to the brakes, when the button is pressed the disc is magneticly 'stuck' to the forward part of the assembly, and your release on the brake pedal means the pressure is now lower in front of the valve than behind it. That pressure in the rear brake system keeps the disc from moving. Thus the only two ways of freeing it up is to be able to apply MORE pressure from the brake pedal back to the valve, or relieve some of the pressure in the in the rear wheel assemblies so the disc can move back and let the DOT-5 flow again. You DO NOT want to try to get to that valve if it should go bad. Easiest way is to take the entire boom assembly off, if that can be called easy.
SCSG-G4
PSVB 3003
- 5,370
- 3,383
- 113
- Location
- Lexington, South Carolina
Winch is about 500, est high on the tires at 200 each, front bumper as much as 250, cab 1500-2000, engine 2000, transmission 350-400, transfer case 500-700, axles maybe 500-700 each, misc frame parts 400-600, frame ?. But this is my guess from moving deuce parts around. YMMV.
- 2,677
- 8,649
- 113
- Location
- Alexandria, La
Without the wrecker package, I imaging it would he a little less than a standard 800 series cargo truck. Probably between 18,000-20,000 lbs.The weight of an M62A2 is 32,270 lb.
Can you help me estimate his current weight?
My idea would be to lift the truck and put it on a trailer.
Not sure how much the bed weighs, and the 800 series comes in at a hefty 21,020 empty.
- 2,664
- 2,209
- 113
- Location
- Sunman Indiana
Figure close to 2,000lb for a 14’ cargo bed
msgjd
Well-known member
- 1,086
- 3,344
- 113
- Location
- upstate ny
you are lucky to have the wrecker's micro-loc feature regardless of what body you will use. .. Not all wreckers had this item (surprisingly, my M62 did not receive one when the army "upgraded" it to an A2 .. Without it, holding the truck still while using the boom is a real pain sometimes , especially on soft ground when the chocks sink .. Of course , a micro-loc is not to be trusted completely, especially when the operator is not with the vehicle .. In the late 1980's I witnessed a flatbed truck of lumber which was left running unattended for a half-hour, apparently lose its "lock" and roll backwards down the hill into an office building they were working on .. nobody hurt... The outfit I worked for at the time pulled the truck out and sure enough, I spotted the micro-loc , and it was on, but not the hand parking brake. Nor were there any chocks .. What happens to the micro-loc is the slighest seepage of brake fluid will cause it to eventually release, such as a leaky wheel cylinder or rusty weeping brake line etc
Last edited:
SCSG-G4
PSVB 3003
- 5,370
- 3,383
- 113
- Location
- Lexington, South Carolina
Some of the TM's incorrectly call it a micro lock. They are made by MICO corporation, and they are not cheap.
- 7,724
- 19,777
- 113
- Location
- Charlotte NC
.
Another brake locking device was discussed in another forum. Kinda interesting - and this piece of hardware was still being manufactured in the 1980's by BrakeLok.
Brakes not releasing
Over the last week or so, I’ve had a brake issue with my M-548 wrecker. After depressing the brake pedal the brakes will not release again. The harder you depress the pedal, the harder the brakes apply. The brakes will only release if you crack a wheel cylinder bleeder at a wheel on any axle...
www.steelsoldiers.com