I finally picked up my first trailer. I am very excited, to the detriment of my wife. It's an M1102 w/o any covering. The condition code was B3 issue-able. There was only one minor problem, one of the tie-downs came off. I'll have to figure out how to rivet it back on. I bought a combo ball/pintle hitch made by Reese for towing. It worked very well. I made a wiring adapter for MIL 12-pin to 4-pin from parts I ordered on line. The soldering of the 12-pin was difficult. My bitty soldering iron didn't have enough heat so I took it to a friend with better equipment and more experience. The lighting for the brakes and turn signals was more than adequate. There were no leveling adapters for the back. Is that fairly typical?
I have just two questions. Where do people usually hang the license plate?
Do I need to remove the "US Property" plate?
Thanks to all! The site was very useful preparing to pick up the trailer. It was a real rush
Here are the pics!
I have just two questions. Where do people usually hang the license plate?
Do I need to remove the "US Property" plate?
Thanks to all! The site was very useful preparing to pick up the trailer. It was a real rush
Here are the pics!
Attachments
-
104 KB Views: 51
-
105.1 KB Views: 47
-
103.8 KB Views: 48
-
69 KB Views: 57
-
103 KB Views: 50
-
39.1 KB Views: 43
-
101.2 KB Views: 43
-
101.7 KB Views: 43
Last edited: