goldneagle
Well-known member
- 4,607
- 1,192
- 113
- Location
- Slidell, LA
FORD F150 Raptor ready for clear coat.
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
My new hobby: Wood military vehicles
- Thread starter goldneagle
- Start date
goldneagle
Well-known member
- 4,607
- 1,192
- 113
- Location
- Slidell, LA
Tonneau cover added to FORD F150 Raptor
Attachments
- 3,891
- 3,110
- 113
- Location
- Peoria, Illinois
Very nice indeed!
goldneagle
Well-known member
- 4,607
- 1,192
- 113
- Location
- Slidell, LA
Finished the clear coat on the FORD Raptor
Attachments
goldneagle
Well-known member
- 4,607
- 1,192
- 113
- Location
- Slidell, LA
Finally finished the tracks on WALL E
Attachments
- 8,041
- 20,388
- 113
- Location
- Charlotte NC
.
Neat!! Is that sandpaper on the rollers? To help track the track...
goldneagle
Well-known member
- 4,607
- 1,192
- 113
- Location
- Slidell, LA
Tracks are made from a cloth ribbon with small pieces of oak wood glued to it. Rollers have slightly raised walls to keep the track centered. I don't think the tracks would hold up to play. Too fragile..
- 3,891
- 3,110
- 113
- Location
- Peoria, Illinois
That is some amazing work!! My hat is off to you, Sir! BRAVO
goldneagle
Well-known member
- 4,607
- 1,192
- 113
- Location
- Slidell, LA
Building a Stand for my new lathe.
Attachments
- 3,891
- 3,110
- 113
- Location
- Peoria, Illinois
You have a cabinet shop for sure.....tools are handy
goldneagle
Well-known member
- 4,607
- 1,192
- 113
- Location
- Slidell, LA
Got the drawers and door completed on the lathe stand
Attachments
goldneagle
Well-known member
- 4,607
- 1,192
- 113
- Location
- Slidell, LA
DUKW coming soon......
- 8,041
- 20,388
- 113
- Location
- Charlotte NC
goldneagle
Well-known member
- 4,607
- 1,192
- 113
- Location
- Slidell, LA
It's going to be the longest single piece models I will have at 26-1/4" long..
goldneagle
Well-known member
- 4,607
- 1,192
- 113
- Location
- Slidell, LA
Took 11 LONG segments to make the hull of the DUKW.
Attachments
goldneagle
Well-known member
- 4,607
- 1,192
- 113
- Location
- Slidell, LA
Sanded the hull and worked on the wheels today. (The plans I bought had the wrong rims and tires. I redesigned them to 16 bolt rims and will have 6 log mounts)
Attachments
goldneagle
Well-known member
- 4,607
- 1,192
- 113
- Location
- Slidell, LA
Got the wheels and tires done today. Got the drivers compartment made as well.
Attachments
- 8,041
- 20,388
- 113
- Location
- Charlotte NC
.
So neat... Lots of details on the wheels too.
goldneagle
Well-known member
- 4,607
- 1,192
- 113
- Location
- Slidell, LA
After reviewing a lot of pictures of actual DUKW vehicles I decided to make some modifications to my model since the plans are not accurate. I was able to curve the 2 front corners. I also beveled the engine cover. Steering in on left side now instead of centered. Now has 2 seats instead of 1 in center. Front windshield in now split into 2 piece. The model will not be perfect but will be closer to the actual vehicle.
Attachments
- 8,041
- 20,388
- 113
- Location
- Charlotte NC
.
Good call @goldneagle !
Those upgrades definitely make the DUCKW model a lot more realistic. I wonder if the co-pilot was manning a .50 while they were "headed in" for a landing. According to a quick lookup on the web, about one in four DUKWs came with a .50-caliber Browning heavy machine gun on a ring mount on the right side. There is also a hand mounted search light on the drivers side of the cockpit. There is a small propeller under the back bottom if you have a way to create one...