-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Mystery trailer??
- Thread starter blacktop
- Start date
moleary
New member
- 258
- 9
- 0
- Location
- Jacksonville, Florida
You put stuff on it and pull it around using the clevis.
I love lamp.
I love lamp.
- 1,964
- 215
- 63
- Location
- Arizona
M200a1?
- 4,037
- 113
- 63
- Location
- Ponchatoula LA
yes 200 it is
Are you just looking around the room saying you love things?
60% of the time it works very time.
AaronW
New member
- 870
- 3
- 0
- Location
- Napavine,WA USA
Agreed on the 200 series. Mostly used for mobile generators?
What else does/did the military use these for?
What else does/did the military use these for?
- 695
- 53
- 28
- Location
- Palm Springs, Ca
A little fabrication and it would make an awesome JetSki trailer.
The JetSki should be camo of course.
The JetSki should be camo of course.
yellobronc
New member
- 665
- 3
- 0
Crash_AF
Active member
- 1,530
- 7
- 38
- Location
- Colorado Springs, CO
I would recommend using the pintle, not the clevis as the towing capacity of the pintle is much higher than the clevis... 
And yes, it is an M200 that is missing the fenders. They typically mounted 30 and 60kw generators to them.
The cake is a lie...
Later,
Joe
And yes, it is an M200 that is missing the fenders. They typically mounted 30 and 60kw generators to them.
The cake is a lie...
Later,
Joe
mckeeranger
Member
- 779
- 4
- 18
- Location
- Eastern Kentucky
I've also seen an M200 with a big diesel water pump on it. I wish I had pictures of it, but it was years ago and I didn't think any thing of it at the time.
I don't know if it was build that way, or if it was something added. You know how the military will sometimes build what they need.
- 10,406
- 6,419
- 113
- Location
- Camp Wood/LC, TX
Still not right, the "Lunette eye" hooks to the "pintle" mounted to the tow vehicle.I would recommend using the pintle, not the clevis as the towing capacity of the pintle is much higher than the clevis...
- 34,012
- 1,808
- 113
- Location
- GA Mountains
They have also been made with a large flat deck and a welder and torches on them.
M813A1
Member
- 867
- 3
- 18
- Location
- OKC, Oklahoma
Don't they also use that chassis for the M198 Converter Dolly to pull semi trailers with the Duece and 5 tons ??
ElkHunter61523
Member
- 87
- 0
- 6
- Location
- Chillicothe, Il
That is one of my projects, to do. Can't find one, so build it.
TaylorTradingCo
Active member
- 586
- 68
- 28
- Location
- Ringgold, GA
M200A1 trailers
I just picked up three of those M200A1's last week and should be getting another one in this week if anybody needs one.
I was thinking of getting one of those shelter things that goes in the back of CUCV's or Hummers and seeing if it will fit. It is sort of like a camper top that goes in the back of a pick-up, only military. Does anyone know if it will fit and has it been done before. I would love to see a picture of it.
Derek Taylor
I just picked up three of those M200A1's last week and should be getting another one in this week if anybody needs one.
I was thinking of getting one of those shelter things that goes in the back of CUCV's or Hummers and seeing if it will fit. It is sort of like a camper top that goes in the back of a pick-up, only military. Does anyone know if it will fit and has it been done before. I would love to see a picture of it.
Derek Taylor
- 5,359
- 3,356
- 113
- Location
- Lexington, South Carolina
Derek,
Those shelters are generally S-250's and they have a low ceiling. I have one, and it's barely 6 ft, 3 inches front to back and only about 5 foot, four or five inches high inside, unlike the shop van or S-280 shelter. It will easily fit on the 200 trailer with room to carry a small generator and a dirt bike.
Those shelters are generally S-250's and they have a low ceiling. I have one, and it's barely 6 ft, 3 inches front to back and only about 5 foot, four or five inches high inside, unlike the shop van or S-280 shelter. It will easily fit on the 200 trailer with room to carry a small generator and a dirt bike.
tm america
Active member
- 2,600
- 24
- 38
- Location
- merrillville in
yep m200 i have seen them converted to dollies and have seen s250 shelters on them. the possibilties are endless .i would make a converter dollie out of it if i had one
moleary
New member
- 258
- 9
- 0
- Location
- Jacksonville, Florida
I would recommend using the pintle, not the clevis as the towing capacity of the pintle is much higher than the clevis...
Well you guys can use whatever you want to pull a trailer - but unless you've met my cousin clevis I don't really know how you can judge his towing capacity. I just give him some french fried potaters with mustard and he's good to go... no diesel required.
Capt Pat
Active member
- 487
- 91
- 28
- Location
- Sandusky, Ohio
Jet Ske trailer?? Would have to be one serious ramp for launching, you'd have to back a long way in to get water deep enough. Might want to use a fording equipped vehicle eh.....