napa pto gaskets?

[sac]

Hi all,

Getting a winch for my Deuce, and I thought I read that someone had PTO gasket cross over number for napa? I tride the stickeys and search and didn't find them.

Thanks Scott.

P.S. these trucks a addictive, wife is even getting into it.

 

[doghead]

Yup, it's in the parts list in the stickies (we need more stickies...)

Parts cross reference. http://www.steelsoldiers.com/showthread.php?82427-Deuce-Parts-Quick-Reference-Spreadsheet post # 23.

Victor H26205 / FelPro FPG 55379

 

[sac]

Yup, it's in the parts list in the stickies (we need more stickies...)

Parts cross reference. http://www.steelsoldiers.com/showthread.php?82427-Deuce-Parts-Quick-Reference-Spreadsheet post # 23.

Victor H26205 / FelPro FPG 55379

Thank you I didn't go far enough.

 

[SCSG-G4]

They are 49 cents each at FleetPride, but you do have to tell them which thickness you want. Don't need a part number, just tell them six bolt PTO gasket, and the thickness.

 

[M35A2-AZ]

You may need more then one. I think they come .010, .020 .030, .050".
Be sure to check the back slash on the gears after you put it on.
It is almost impossible to check it with dial indicator on the truck. But you
can feel it for the most part. Most of the time it is .030"

 

[welldigger]

Be sure to tell them you need a shim gasket not a pto cover gasket. Get several in different thicknesses.

 

[sac]

Thanks for all the help, I have some on order.

 

[topo]

A PTO mounted to tight will give you shifting problems just something to watch for . After you are sure everything is good copper washers under the 6 nuts on the PTO will seal gear oil drips.