Near Greensboro, NC Airport, WAS stuck 5 ton pretty good!

[PowerstrokeNC]

I have tried a AG tractor and 4x4 pickup and the 5 ton just laughed...

any my help would be appreciated, 336-210-7733

 

[dawico]

Wish I was closer, I would be all over it.

Good luck and great pictures!

 

[Scottd9990]

Looks pretty muddy there. Rain coming in tonight. I am in Concord and could come up in the morning.

 

[Scottd9990]

I have M109 w/w if that might help??
(704) 756-6456 cell

 

[mikey]

You can probably get out of there if you deflate to 30psi. Looks like you're at like 80psi.

Also, your sig says you have a wrecker. You can't get it out with the M936A2?

Mikey

 

[dawico]

You can probably get out of there if you deflate to 30psi. Looks like you're at like 80psi.

Mikey

That is true. It would at least take some stress off the frame. That thing looks pretty twisted.

 

[Scar59]

You can probably get out of there if you deflate to 30psi. Looks like you're at like 80psi.

Also, your sig says you have a wrecker. You can't get it out with the M936A2?

Mikey

Yep, time to get the wrecker out. The rear winch with a snatch block will pull it right out of there, dont forget the mud spades, ground looks saturated/slick.
Take more pictures. Be safe.
JC

 

[PowerstrokeNC]

Thanks to everybody who called as well as suggestions. I just sold the wrecker a few weeks back. So the rule applies" just when you sell your wrecker you will need it the most"

I really appreciate the comraderie on this site! I had SS members calling from far away as SC willing to drive up to help. Thank you all.

I landed getting out with a 70 ton wrecker hired locally, they were close by so not too bad...

Glad to be out!

 

[PowerstrokeNC]

Changed title to drop the "help" .... Thx

 

[doghead]

fixed title

 

[Scottd9990]

I would like to trail there sometime with you!!

 

[wreckerman893]

Big truck, big stuck. There seems to be an epidemic of stuck trucks lately.

I was moving a big culvert (made out of a 1500 gallon propane tank) and almost got the M936 stuck. I quit while I was ahead.

 

[CBR Metalworks]

I just can't believe how much the frame twists, plus really surprised the front suspension has that much flex. Was Parker not able to pull you out with his truck, or you just needed it out sooner than he could get there?