mijon
New member
- 55
- 0
- 0
- Location
- Fenton, MI.
[h=2][/h]
I'm looking to find out more information on my O'keffe and Merrit Generator/Phase Converter. I purchased the unit off of a government website thinking it was just a simple generator. When I took a look at the unit, after I bought it, I seen that it defiantly wasn't that. I've been told that its a Generator motor that's a phase converter that converts 3 phases of energy down to one. Or you can use all 3 phases of energy??? I really don't know where to start. I've tried looking up some information on the unit but I really didn't dig up anything. If anyone can help me with information, it would be greatly appreciated. My biggest questions are what exactly is it? How do I attempt to crank over the engine? And what can I use it for? I've listed information from the maker tag below. Thanks
O'keffe and Merrit Model # MG-15-400 Serial # 78,
Motor Generator Set PU-126/U
Motor Rating
25 hp motor
Rpm at Rated Load 1735
Frequency 60
3 phase, voltage 208, rated load amps 55 per line
Generator Rating
Y connection
120/208 volts
3 phase, 4 wire
43.5 Rated load Amps per line
Triangle connection
120 volts
1 phase, 2 wire
10 kw output
104 rated amps
O'keffe and Merrit Model # MG-15-400 Serial # 78,
Motor Generator Set PU-126/U
Motor Rating
25 hp motor
Rpm at Rated Load 1735
Frequency 60
3 phase, voltage 208, rated load amps 55 per line
Generator Rating
Y connection
120/208 volts
3 phase, 4 wire
43.5 Rated load Amps per line
Triangle connection
120 volts
1 phase, 2 wire
10 kw output
104 rated amps
Attachments
-
46.3 KB Views: 7
-
53.9 KB Views: 16
-
37 KB Views: 11
-
43.5 KB Views: 10