maxxplanck
Member
- 880
- 3
- 18
- Location
- Fowlerville, Michigan
Ok heres my problem, when I would take my deuce out and run her at full speed she would start to stall out, then I would have to nurse her home. So over the weekend I noticed I had some sandy like settlement in my fuel tank. So I removed my tank filtered all the fuel, did several gasoline flushes and then a good power wash. Then I reinstalled the tank, next I installed my secondary spin on fuel filter kit ( primary spin on fuel filter already installed before I noticed stuff in my fuel tank ). Everything looked great then I took her out for a test drive about 6-7 miles when I pulled up in the drive way and let her idle and she sounded rough about 500-600 RPM s then she died and now it wont start. After I installed the secondary spin on fuel filter I wonder if I didnt bleed it enough...... Please guys Im at wittsend with this any advice... Thanks so much..![Banging Head aua aua](https://www.steelsoldiers.com/images/smilies/icon_smile_banghead_125.gif)
![Banging Head aua aua](https://www.steelsoldiers.com/images/smilies/icon_smile_banghead_125.gif)