dakotafear3088
Member
- 65
- 0
- 6
- Location
- Danville pa
hey guys, I got a reconditioned injector pump and have a few questions on timming and set up of the pump. its the ldt 465-1c turbo. First off, on the harmonic balancer there are 3 lines...
1st line- lds 427
ld 465-1,
lds465, lds465-1a, and ltd 465
which line am I lining this up on? This is a good starting point!!!!
second question.... when installing the pump, the front gear has the 3 small 9/16 bolts and the large 3/4 center bolt.... how do i line up the gears and NOT advance or change timming on the pump? The pump has already been linned up and ready to install.
I was told to loosen the 3 small bolts and slide the pump and gear in, then using the center bolt turn the nut til the line in the top pump sight box lines up and then tighten the 3 smaller bolts.... check for all lines to match the marks.
what is the porcess of bleeding and preping the motor for start up? anything I need to do? just want to get all the ducks in a row lol
is this correct or is this false info?
anyone that can give me a good clear explination on how to time my the pump, I would greatly appreciate it
Thanks to all thant can help
1st line- lds 427
ld 465-1,
lds465, lds465-1a, and ltd 465
which line am I lining this up on? This is a good starting point!!!!
second question.... when installing the pump, the front gear has the 3 small 9/16 bolts and the large 3/4 center bolt.... how do i line up the gears and NOT advance or change timming on the pump? The pump has already been linned up and ready to install.
I was told to loosen the 3 small bolts and slide the pump and gear in, then using the center bolt turn the nut til the line in the top pump sight box lines up and then tighten the 3 smaller bolts.... check for all lines to match the marks.
what is the porcess of bleeding and preping the motor for start up? anything I need to do? just want to get all the ducks in a row lol
is this correct or is this false info?
anyone that can give me a good clear explination on how to time my the pump, I would greatly appreciate it
Thanks to all thant can help