Need truck moved - VA to TX

[wehring]

I need to have a truck moved from Meadows of Dan, VA to Houston, TX

17,000# and 11' tall

Justin Wehring
979 997 3112

 

[73m819]

did you get the crane truck or the 8x8

 

[wehring]

crane truck

The crane truck.

Justin Wehring
979 997 3112

 

[decodeme2]

Wow!...1,400 miles.
Tall...!...I can load it and move it for 4k...Like to see a pic of it..
Kevin.. 301.922.2009 cell anytime..

 

[73m819]

$3.50 a mile

 

[doghead]

Can it be driven to TX?

 

[wreckerman893]

Can it be driven to TX?

Only if you're "Stoneballs Jackson".

 

[NDT]

Just got a similar load from NC to TX for $2/mi

 

[73m819]

Can it be driven to TX?

Only if you're "Stoneballs Jackson".

You may be calling me "Stoneballs Ron", at least we are talking

 

[cranetruck]

did you get the crane truck or the 8x8

The 8x8 ain't going nowhere without me.

 

[cranetruck]

Wow!...1,400 miles.
Tall...!...I can load it and move it for 4k...Like to see a pic of it..
Kevin.. 301.922.2009 cell anytime..

It's the HIAB that makes it 11' tall...
With the spare engine and extras, figure 21,000#.

 

[cranetruck]

Can it be driven to TX?

Have only used it around the yard since returning from the cross country trip. Have since bypassed the FDC, but it has a pyro, so that in itself is not a problem, but the knock and possible low oil pressure may be related to a rod bearing that's at the end of its useful life. Then again, I may be paranoid after so many posts about thrown rod(s) etc. It's had this knock for a long time, thousands of highway miles actually.
Engine runs virtually smokeless.

 

[73m819]

This PIC would be good on the 12SSGAR WANTED POSTER.

 

[cranetruck]

Very funny, Ron.

 

[73m819]

Bjron, your one of the "OLD" good guys, you need to be at the 12SSGAR either on your own feet OR a SNATCH & GRAB operation

 

[decodeme2]

Can move it in 10 days or so, if not in a hurry...
We beat the brokers rates...Fully insured and legal..etc..
Move up to 11'....
Kevin...
Surplus transport llc. Moving trucks off bases

 

[Westex]

Maybe you could pick up Justin's rig and then drop down to Florida and grab mine; they're both going to the same place.

 

[wehring]

kevin

Thanks Kevin but I have it worked out. Please check Westex post. He needs to have a drill rig moved from FL to my place in TX.

I was recently talking with Stewart about F450s. Did you recently get one?

Justin Wehring
979 997 3112

 

[wehring]

ditto

Must have posted while I was typing...

Justin

 

[Westex]

My mistake......................