• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Need truck moved - VA to TX

doghead

4 Star General /Moderator
Staff member
Super Moderator
Steel Soldiers Supporter
26,246
1,179
113
Location
NY
Can it be driven to TX?
 

cranetruck

Moderator
Super Moderator
Steel Soldiers Supporter
10,350
75
48
Location
Meadows of Dan, Virginia
Can it be driven to TX?
Have only used it around the yard since returning from the cross country trip. Have since bypassed the FDC, but it has a pyro, so that in itself is not a problem, but the knock and possible low oil pressure may be related to a rod bearing that's at the end of its useful life. Then again, I may be paranoid after so many posts about thrown rod(s) etc. It's had this knock for a long time, thousands of highway miles actually.
Engine runs virtually smokeless.
 

73m819

Rock = older than dirt , GA. MAFIA , Dirty
Steel Soldiers Supporter
In Memorial
12,195
325
0
Location
gainesville, ga.
Bjron, your one of the "OLD" good guys, you need to be at the 12SSGAR either on your own feet OR a SNATCH & GRAB operation :beer:
 
Last edited:

wehring

Active member
1,375
26
38
Location
Angleton, TX
kevin

Thanks Kevin but I have it worked out. Please check Westex post. He needs to have a drill rig moved from FL to my place in TX.

I was recently talking with Stewart about F450s. Did you recently get one?

Justin Wehring
979 997 3112
 
Top