I buy mine always on digikey.com. They have quite all connectors you can immagine...
Christian
Christian
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
New Arduino-based FMTV CTIS controller ROCKS!
- Thread starter Reworked LMTV
- Start date
spankybear
Well-known member
- 898
- 924
- 93
- Location
- WA
Not for 24.95 USD for 3 shipped ...
FloridaAKM
Well-known member
- 2,699
- 392
- 83
- Location
- Gainesville, Florida
.
- 1,511
- 1,178
- 113
- Location
- TN
DigiKey is the best, particularly if you are sourcing electronic parts. If you buy off of, say E Auction sites, you are likely getting China rejects. No really!
spankybear
Well-known member
- 898
- 924
- 93
- Location
- WA
You only get china stuff if you don't have a clue. No really... The connectors I got from the auction site are NOS Bendix made in the late 70s... 100% US made! At a price that can't be beat... Plus you get 3 US made NOS Bendix connectors. Isn't going to happen using Digikey, Mouser, or Newark!
Search that part number and you too will get see the NOS Bendix connectors. Made well before they where known to The State Of California to cause cancer. Also before RoHS and they still used lead solder. If you want to spend upwards of a 100 bucks for a connector from Digikey Et Al. its your money. Oh and the new stuff you get from digikey has a high probability of being made in china... No really... I see new MIL-C-26500 BACC45 aviation connectors that are made in China... Cinch comes to mind.
Last edited:
- 1,511
- 1,178
- 113
- Location
- TN
Did you have a bad day or something? I said electronic, not electrical. I considers those connectors ELECTRICAL. I'm talking about chips and IC's, SCRs, diodes, transistors, etc. . THERE'S A DIFFERENCE. It is WELL-DOCUMENTED that Chinese sourcing of EELCTRONIC parts can be hit or miss because they sell-off their quality rejects.. Sheesh....
Digi-Key has documented ISO channels. So do the others. I don't typically care where they come from, as long as the quality is there. I don't have time to deal with crap parts.
No really!
- 1,511
- 1,178
- 113
- Location
- TN
Here is the documentation that comes with Christian's CTIS controller. Straight-forward and easy to understand.
Attachments
Mario
Active member
- 315
- 87
- 28
- Location
- Rio Rancho, NM
Thanks for the writeup and the videos.
Mario
Active member
- 315
- 87
- 28
- Location
- Rio Rancho, NM
$200 + $40 for shipping from Italy.
Looks like lead time is about 2-3 weeks.
That sounds like a very descent price for an excellent product. I’m in
Mario
Active member
- 315
- 87
- 28
- Location
- Rio Rancho, NM
I know, right?
That's why I've asked him to build one for me.
Sent from my SM-G975U using Tapatalk