New M1031 owner

[jets1959]

Welcome to both SS and the m1031 club! You will in joy both. If you are not sure when the last maintenance was done you will need to do it all. Also you need to do the Doghead mod ASAP

 

[jets1959]

A quick license plate mod is to buy gm pn 15634432 bracket from your dealer and install it behind the drivers side tail light. Bracket is about $13. And gives a factory look and if the lense under the light is still clear the plate will even be lit. The hardware to mount the plate can be bought at any auto parts store. The same kit is also used to mount the front plate on the bumper.

 

[TheBigDogg]

Welcome to both SS and the m1031 club! You will in joy both. If you are not sure when the last maintenance was done you will need to do it all. Also you need to do the Doghead mod ASAP

Doghead mod?

 

[jets1959]

Search the CUCV forum. It is a cheap quick mod to save you starter and flywheel. Takes about an hour if you really take your time and cost less than $25.

 

[bshupe]

Welcome, I just got my first MV, CUCV and M1031 all in one swoop. lol Its a good looking truck you have!

 

[1 Patriot-of-many]

SS is on tapatalk, and on other forums using tapatalk you can post pics from your phone

Funny the guys berating don't even know the site pops up tapatalk.....

 

[86m1028]

I like the wide rear wheels.
Too bad you didnt end up with a set of 4.

Nice truck, welcome to the m1031 club.

 

[mr.travo]

Welcome to the Contact Truck world! They are a lot of fun and come in handy for making a mobile repair facility! Biggest upgrade that needs to happen in radio in truck with speakers facing out of the bed box! It's the small things in life that make you smile

Travo

 

[TheBigDogg]

thanks for all the compliments on the truck, but I have to sell it....

 

[jets1959]

That is a real shame!!! You would have really enjoyed it!!!

 

[mr.travo]

How much are you looking to get?