-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
No beadlock / run flat PSI
- Thread starter tgejesse
- Start date
- 7,017
- 9,695
- 113
- Location
- Papalote, TX
I am also running 45 PSI on my treadwright tires without bead locks.
I have run them at 30 PSI with no issues
I have run them at 30 PSI with no issues
Awesome to hear, thanks!
- 3,003
- 4,420
- 113
- Location
- Olympia/WA
If it were mine I wouldn't worry about anything over 20psi. That is a lot of force on the tire bead/rim.
Even at lower pressure, you aren't just going to lose the tire off the rim without some major outside force. If you aren't always driving onto curbs or major potholes at high speed, then anything over 20psi should be fine.
Even at lower pressure, you aren't just going to lose the tire off the rim without some major outside force. If you aren't always driving onto curbs or major potholes at high speed, then anything over 20psi should be fine.
- 713
- 987
- 93
- Location
- Southern Minnesota
20 PSI at the lowest (off-road -- fields, dirt roads, etc..).. I usually run at 25-30 PSI.
I don't think I'd run lower then 20 PSI, except by accident.. but I would also expect down to 15 would hold up in light conditions.. but I wouldn't chance it.
I don't think I'd run lower then 20 PSI, except by accident.. but I would also expect down to 15 would hold up in light conditions.. but I wouldn't chance it.