ivbeenrokd
New member
- 423
- 1
- 0
- Location
- knoxville, tn.
I'm working on an M35a2 with heater and electric wipers that I believe are from an a3. Neither the wiper motor or heater motor work. I tested voltage at the wiper motor and found 25.5 volts and determined the motor must be bad so I removed it. I then found 25.5 volts at the heater motor and thought it must be bad as well. I had another heater motor here so I connected it and it didn't work either. I then took the new heater motor to the battery and tested and it works fine. The big question is if I can get 25.5 volts at the heater location then connect my heater motor to the same positive and ground I test from and it not work what's the deal?
Any thoughts/help would be greatly appreciated.
Thank you,
John
Any thoughts/help would be greatly appreciated.
Thank you,
John