Official 2015 Ga. Rally buy/sell/trade thread

[rebelqwes87]

Have a SS member that will not be at the rally, he is looking for,
A level wind for the front 5t wench,
A tractor behind the cab gear box,
TWO GOOD 1400rx20s on the two piece 5t rims

Ron I have a tool box from a 931 that mounts behind the cab.

 

[Ferroequinologist]

I am looking for the two mirror brackets that go from the bottom and top to the fender on the passenger side of a m35a3.

I meant m35a3...

 

[CARNAC]

Im looking for a extra long cargo cover to cover firewood if anyone has a not so great on let me know.

Bummer, just sold a 927/928 tarp to 98G.

 

[docfarmall]

I just need a old tattered one to cover fire wood

 

[amgeneral72]

Found yet another towbar to bring. It's NOT a medium! About five feet long, not adjustable, holes for the pins to connect the feet are a measured 1.660 inches in diameter, so the correct pins would be 1 5/8" dia. Weighs 110-115 pounds. $100 or best reasonable offer.

I have some feet that go with that towbar if anybody needs them. For 1' pin vehicles

Also have extra feet for the med. adjustable & med. heavy.

 

[zebedee]

Big Jeff - you're up!

816 BII needed:-

#5 Pinch bar, offset & tapered ends 1" hex x 26" (N.B. Not #17 crowbar 47" - 49")
#7 Wrecking bar, gooseneck and pinch point with claw 30" Try 'Stanley'
#10.1 Box Assembly, Stowage accessories ....... ?
#16 Extension cord 25'
#19 Acetylene Cylinder .................... Advise if ones you have are fillable or DEMO ONLY. @
#20 O2 Cylinder .............................. Advise if ones you have are fillable or DEMO ONLY. @
#28 NATO inter vehicle slave 20'
#30 Mattock pick w/o handle @
#42 Chain Sling 2 leg ring & 2 hooks 125"x 5/8"
#44 Webbing strap 1 1/2" x 24"
#53 Open End Wrench 1 5/8" .......} @
#54 Open End Wrench 1 11/16" ....} I may have a couple of these.. if I can find them! @
#55 Open End Wrench 1 13/16" ....} @

Additional Authorisation List:-

Crosscut saw Case
Crosscut saw, 1 man, 5' overall @


............. whatever you have of this stuff, better give me some prices before you load up!!!


Edit - Stuff Jeff( or others) have - highlighted in red, other stuff still needed - stays in black.

 

[MWMULES]

Found three more 5 step ladders one on left has small dent by lower rungs $90 other two are $95 OBO Sat afternoon, all have the hooks on top . Thanks Mad Hatter 58, juanprado, and swiss All spoken for.
​

BTW, Wed is the last day to tell me to haul listed items to the Rally. Leaving Thurs AM for the BeefCo hub and Sat for Ga!
​

 

[swiss]

MWmules Swiss needs a good ladder

 

[timntrucks]

local member who is going wanted me to post his needs.. a prick 25 vietnam radio.. a good running mule, and a canvas cab top for his duece. shout back my way and ill give his number. he will be their monday and staying all week

 

[gimpyrobb]

BTW Wed is the last day to tell me to haul listed items to the Rally. Leaving Thurs AM for the BeefCo hub and Sat for Ga

You mean your leaving wed for Dayton?

 

[pctrans]

Stumbled across some more "treasures"....

800 series power steering gearbox - $75
4 - almost new - 32x11.5x15 radial mud terrain tires for a M1009 - on rims - $500 obro
M101 side rail set; w/bows; excellent condition - $150
Bottom half of hardtop for deuce or 800 series, good glass - $50
Pintle Hitch - $100
Bead locks for 20" rims - $5/ea
Run-flats for Humvee rims - $5/ea

 

[patracy]

MWmules Swiss needs a good ladder

Referring to yourself in the third person again I see.

 

[gimpyrobb]

Pete, I'll take some of the 20" beadlocks, 5 or 6.

 

[Mad Hatter 58]

I will take one set of stairs

 

[Streamline]

Anyone need a nice 5 step Alum. ladder?

If its still available? Would it be the right height for a M101A1 Trailer? If So how much? Thanks

 

[Streamline]

Couple last minute add on's I can bring 3 new in the box tan vestibules skins with door for $25 pm me or not going. These were made for the TEMPER tent, but may fit others. View attachment 587095 View attachment 587096

I will bring some nos DRASH tent doors Tan w/black inside and Green w/white inside $4ea great Xytex fabric material for projects like seat covers ect. View attachment 587097

I will take 2 of the Temper Vestibule Skins with doors If you have them Left? Thanks

 

[Streamline]

Im in Need Of A Tire Rubber Only I can use for a Spare for my M101a1 Trailer. It has the Original 5 lug Wheels. I believe its the M37 Rim as well! I have the Rim I just finished redoing and Painting.




I have available for Pre Sale and save some money are these HARD TO FIND Large Ammo Cans
CNU-405 Also Called FAT 25mm This is MY " BIG DADDY CAN "

Pre Sell Price $37.00

Removable lid with rubber seal; locking lid; two side handles; metal.
Product Dimensions: (Length)17.5 inches x (Width)10 inches x (Height)14 inches. Can Weight: 31 LBS

1 Pallet ONLY available about 25 or so cans left. I sell these at Gun Shows for $45.00 to $50.00

************************************************************

I also Have New Factory Direct 50cal Cans Available!
These have No Stenciling or Writing on them or any kind! Direct From bWAY Ammo Can Manufacture here in GA

Selling these for $12.00 each at show.




*************************************************************

If we can get some built in time I will have some of our Ham Radio Filed Day Mast Kits available.
Probably only 3 to 6 this year. These have been selling as fast as we can get them built.
We are also Now POWDER COATING the Tripod GREEN

$160.00 for the Kit. ( Pre Order Is Only Way To Guarantee A Kit )
1- Custom Made Steel Tripod "only 3 Pounds" " Powder Coated "
12- New 4ft Aluminum Ribbed Military Poles
2- 3 Point Guy Rings, Made from Military ABS Molded Plastic " Very Tuff"
6- 12" Aluminum Ground Gripping Stakes
2- 12" Disk for Base
1- Vinyl New Carrying Bag

Also my Tripod works very good for a Self Standing Flag Pole! No Burring of the pole Needed!


Thanks

 

[Floridianson]

If its still available? Would it be the right height for a M101A1 Trailer? If So how much? Thanks

I have two Alu. 5 step ladders that I will bring plus have some hand rail kits. To be honest the 101 trailer might be a little low. The 5 step seems to work correct on the trailers like the expandable van trailers or Exp.van trucks. Something that has a floor around upper chest seems to keep all the treads level like they should be. I think 200 is a fair price for one ladder.

 

[SCSG-G4]

Pete,
I'm interested in
Bottom half of hardtop for deuce or 800 series, good glass - $50

 

[MWMULES]

MWmules Swiss needs a good ladder

MWMULES has a nice a nice 5 step ladder loaded with swiss name on it!