Official 2020 Georgia Military Vehicle Rally buy-sell-trade thread

[timntrucks]

loading up today and tomorrow if anyone wants anything. not bringing any big stuff unless spoken for

 

[sandcobra164]

No need to sleep on the ground Wes, we'll have room in the big cabin across the road from the main lodge.

 

[4XDesign]

Some M35 hood lift kits still for sale. $180

 

[patracy]

If no one is interesting in the oshkosh HVAC system in a crate, I won't be bringing it. I won't be able to get there until Friday. And I'll have to leave Saturday afternoon. I have a failover test that we had to postpone to next Sunday.

 

[timntrucks]

i have a 105 ladder loaded up. some mess kits , water cans, a fuel selector valve and some water packs.

 

[Streamline]

Hello all. I will be checking in on Wednesday, looking forward to seeing everyone.

I will have much less items this year to sell and trade. Been a pretty tuff year.

I have some MGPTS Tent poles, These are wall poles with one "Y" Pole.
The Tent Purlins in this picture are all bad, they are for scrap parts. $125 for All)

Also Some Temper Fly Attachments. $10 each or Deal for all.



Pup Tent Canvas, Used.
$5 to $10 each based on condition. Good for seat covers.



6 Tent Lights 4ft long. 4 in case. $45 each or $200 for all

Used Tent Stakes Short and Long $.50 each or buy A lot save A lot.



Hard to Find Large Ammo Can. I paid more for these then I would have liked too, but it's been over a year since I have found any in good shape.
These are the CNU 405 25mm Ammo Can. $50 each.
Measurements:

• Inner Dimensions: 9.75" x 17.25" x 14"
• Outer Dimensions: 10.6" x 18.6" x 14.6"(with lid)
• Can Weight is 22.5 pounds empty.

I will also have a few bags of loose small items yall can go through.
See yall in a few days.

 

[Elijah95]

Hello all. I will be checking in on Wednesday, looking forward to seeing everyone.

I will have much less items this year to sell and trade. Been a pretty tuff year.

I have some MGPTS Tent poles, These are wall poles with one "Y" Pole.
The Tent Purlins in this picture are all bad, they are for scrap parts. $125 for All)

Also Some Temper Fly Attachments. $10 each or Deal for all.

View attachment 817022

Pup Tent Canvas, Used.
$5 to $10 each based on condition. Good for seat covers.

View attachment 817023

6 Tent Lights 4ft long. 4 in case. $45 each or $200 for all

Used Tent Stakes Short and Long $.50 each or buy A lot save A lot.

View attachment 817024

Hard to Find Large Ammo Can. I paid more for these then I would have liked too, but it's been over a year since I have found any in good shape.
These are the CNU 405 25mm Ammo Can. $50 each.
Measurements:

• Inner Dimensions: 9.75" x 17.25" x 14"
• Outer Dimensions: 10.6" x 18.6" x 14.6"(with lid)
• Can Weight is 22.5 pounds empty.

View attachment 817031View attachment 817032View attachment 817033


I will also have a few bags of loose small items yall can go through.
See yall in a few days.

Let me trade you out of that can


Sent from my iPhone using Tapatalk

 

[Streamline]

I do have a New Item a HUMVEE RECEIVER HITCH; with Holes for PINBALL attachment, that will be available soon, I was hoping to have them available to sell at the rally, but could not get them completed in time. I designed a similar one; in CAD, to be made last year but was not able to get it completed.
I'm also building one with chain attachments as well.

I do have one completed I will have at the rally to show, and possibly take orders if there is any interest.
( Im open to suggestions if anyone has any ideas that could be added to this setup to help the community.)

I'm looking for work so I'm offering CAD design work to the community, at a reasonable hourly or by the job rate.
I can also offer to 3D print your design in many cases for prototyping, of have a friend machine it for you out of steel or Aluminum.

These will go for $80 to $100 each.

I 3D printed the Mounting Plate for Proof of concept, the Mount Plate on Right Was 3D Printed.

 

[Streamline]

Let me trade you out of that can


Sent from my iPhone using Tapatalk

I have 5 or 6 of them so stop by and lets see what you have to trade.
I will be setup at or near Sight #B1 Camper spots.

 

[Streamline]

As always I'm looking to buy more of the Fiberglass and Aluminum 4ft Support Poles.
I have been paying between $15 and $30 a set of 12 with or without stakes, Price is based on condition.
Per pole price has been between $.85 cent to $2.50 possibly $3.00 per pole based on condition.

Also will buy New 12 inch stakes and New Support Pole Bags.

 

[Streamline]

I also still have a few sets of the Billet Aluminum Pins for the 11x11 MCP Tent ( Command Post Tent)

These are replacement Pins that I designed and made to fix these tents when the cheap easy to snap connector pin snaps on your tent frame. These replacement pins can be epoxied in place or you can mark and drill a hole to place the lock pin.

$60 for full set of 6 replacement pins.
(You will never break another pin, but if you do, I have you covered with Free Lifetime Replacement!)

 

[Elijah95]

Spot mirror for deuce/5 ton $5 sold to Tim

M35A2 air cleaner assembly with boot and U shaped turbo inlet tube. $25




Sent from my iPhone using Tapatalk

 

[timntrucks]

Spot mirror for deuce/5 ton $5

M35A2 air cleaner assembly with boot and U shaped turbo inlet tube. $25View attachment 817085
View attachment 817086
View attachment 817087


Sent from my iPhone using Tapatalk

ill take that mirror

 

[juanprado]

Looking for m105 right hand wheel studs?

 

[Streamline]

I have some rifle gun bags, maybe 5 or 6 left.
$40 each

 

[phil2968]

Ok folks, the 20GMVR is almost here and this is the buy sell trade thread.

Here's how this works: you post up what you're planning on bringing to sell and what you're looking for. And commerce will commence.

Here's my lists:

I am looking for:
A pair of NOS highback M44A3 or HMMWV seats. Don't need bases.
A good whistler turbo for 2.5 ton multifuel

I am selling:
Nothing I can think of right now.

I'll be there Saturday morning with your turbo.

 

[Elijah95]

M series tail light lenses $25 obo good shape need cleaning



Sent from my iPhone using Tapatalk

 

[Elijah95]

Last call folks, I have a ton of stuff still for sale and if it isn’t spoken for by tonight I don’t plan on bringing it.

Speak up if you want to buy something


Sent from my iPhone using Tapatalk

 

[andy3]

In addition to the MKT I listed earlier here are a few of the things I can bring on Saturday.

M35 Cargo tarp bows. 6 $15ea
1x of 3/4” tow bar foot for Medium tow bar. $30ea ( might have a couple sets.)
3/4’ & 1’ double tow-bar foot $50
Propellant tube with cam-lock lid $25
3x Night Vision goggle steel cases $20 ea
Soft-sided equipment bag. Makes great cooler $25
M-35 Rear frame cross member $25
Several militay batons $8 ea
M35A2 Injection pump G-Code pull $250

 

[sandcobra164]

Last minute request. Does anyone have any interest in hauling an M1102 trailer to Fort Lauderdale, Florida to the port? The gentlemen who purchased it goes by Stinkmarder on this forum and he offered me $500 to haul it. I have no interest in taking it down there but I can pull it to the Rally for free as I doubt I'd be able to calculate the additional fuel the M923 uses to pull it. It's not heavy but has a set of 24 bolt HMMWV wheels in the box and some electrical connectors so figure around 1,300 pounds. It towed fine 25 miles from the base to my house.