• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Official 2020 Georgia Military Vehicle Rally buy-sell-trade thread

patracy

Administrator
Staff member
Administrator
14,634
4,788
113
Location
Buchanan, GA
If no one is interesting in the oshkosh HVAC system in a crate, I won't be bringing it. I won't be able to get there until Friday. And I'll have to leave Saturday afternoon. I have a failover test that we had to postpone to next Sunday.
 

Streamline

Active member
544
107
43
Location
Comer, Ga.
Hello all. I will be checking in on Wednesday, looking forward to seeing everyone.

I will have much less items this year to sell and trade. Been a pretty tuff year.

I have some MGPTS Tent poles, These are wall poles with one "Y" Pole.
The Tent Purlins in this picture are all bad, they are for scrap parts. $125 for All)

Also Some Temper Fly Attachments. $10 each or Deal for all.

IMG_20201101_172211.jpg

Pup Tent Canvas, Used.
$5 to $10 each based on condition. Good for seat covers.

IMG_20201101_172345.jpg

6 Tent Lights 4ft long. 4 in case. $45 each or $200 for all

Used Tent Stakes Short and Long $.50 each or buy A lot save A lot.

IMG_20191018_114949.jpg

Hard to Find Large Ammo Can. I paid more for these then I would have liked too, but it's been over a year since I have found any in good shape.
These are the CNU 405 25mm Ammo Can. $50 each.
Measurements:
  • Inner Dimensions: 9.75" x 17.25" x 14"
  • Outer Dimensions: 10.6" x 18.6" x 14.6"(with lid)
  • Can Weight is 22.5 pounds empty.
IMG_20201021_151243.jpgIMG_20201021_151338.jpgIMG_20201021_151424.jpg


I will also have a few bags of loose small items yall can go through.
See yall in a few days.
 

Elijah95

Certified Rookie
1,239
1,184
113
Location
Georgia
Hello all. I will be checking in on Wednesday, looking forward to seeing everyone.

I will have much less items this year to sell and trade. Been a pretty tuff year.

I have some MGPTS Tent poles, These are wall poles with one "Y" Pole.
The Tent Purlins in this picture are all bad, they are for scrap parts. $125 for All)

Also Some Temper Fly Attachments. $10 each or Deal for all.

View attachment 817022

Pup Tent Canvas, Used.
$5 to $10 each based on condition. Good for seat covers.

View attachment 817023

6 Tent Lights 4ft long. 4 in case. $45 each or $200 for all

Used Tent Stakes Short and Long $.50 each or buy A lot save A lot.

View attachment 817024

Hard to Find Large Ammo Can. I paid more for these then I would have liked too, but it's been over a year since I have found any in good shape.
These are the CNU 405 25mm Ammo Can. $50 each.
Measurements:
  • Inner Dimensions: 9.75" x 17.25" x 14"
  • Outer Dimensions: 10.6" x 18.6" x 14.6"(with lid)
  • Can Weight is 22.5 pounds empty.
View attachment 817031View attachment 817032View attachment 817033


I will also have a few bags of loose small items yall can go through.
See yall in a few days.
Let me trade you out of that can


Sent from my iPhone using Tapatalk
 

Streamline

Active member
544
107
43
Location
Comer, Ga.
I do have a New Item a HUMVEE RECEIVER HITCH; with Holes for PINBALL attachment, that will be available soon, I was hoping to have them available to sell at the rally, but could not get them completed in time. I designed a similar one; in CAD, to be made last year but was not able to get it completed.
I'm also building one with chain attachments as well.

I do have one completed I will have at the rally to show, and possibly take orders if there is any interest.
( Im open to suggestions if anyone has any ideas that could be added to this setup to help the community.)

I'm looking for work so I'm offering CAD design work to the community, at a reasonable hourly or by the job rate.
I can also offer to 3D print your design in many cases for prototyping, of have a friend machine it for you out of steel or Aluminum.

These will go for $80 to $100 each.

IMG_20201026_193231.jpg IMG_20201027_004333.jpg Hitch.jpg IMG_20201027_021933.jpg I 3D printed the Mounting Plate for Proof of concept, the Mount Plate on Right Was 3D Printed.
 

Streamline

Active member
544
107
43
Location
Comer, Ga.
As always I'm looking to buy more of the Fiberglass and Aluminum 4ft Support Poles.
I have been paying between $15 and $30 a set of 12 with or without stakes, Price is based on condition.
Per pole price has been between $.85 cent to $2.50 possibly $3.00 per pole based on condition.

Also will buy New 12 inch stakes and New Support Pole Bags.

IMG_0633.JPG 20140424_180711.jpg IMG_20170826_122903.jpg

IMG_20170406_132432_1.jpg military-fiberglass-4ft-poles-w-fiberglass-reinforcement-ring-23.jpg 79132030_2392005344385107_5529857044565196800_n.jpgCamo Netting Pole Bag.jpg
 

Streamline

Active member
544
107
43
Location
Comer, Ga.
I also still have a few sets of the Billet Aluminum Pins for the 11x11 MCP Tent ( Command Post Tent)

These are replacement Pins that I designed and made to fix these tents when the cheap easy to snap connector pin snaps on your tent frame. These replacement pins can be epoxied in place or you can mark and drill a hole to place the lock pin.

$60 for full set of 6 replacement pins.
(You will never break another pin, but if you do, I have you covered with Free Lifetime Replacement!)

IMG_20171115_144254.jpgIMG_20171115_144304.jpgMCPS Replacment Aluminum Pin Prep 5.jpg
 

Elijah95

Certified Rookie
1,239
1,184
113
Location
Georgia
Spot mirror for deuce/5 ton $5 sold to Tim

M35A2 air cleaner assembly with boot and U shaped turbo inlet tube. $25IMG_2883.jpg
IMG_2884.jpg
IMG_2890.jpg


Sent from my iPhone using Tapatalk
 
Last edited:

phil2968

Active member
2,591
18
38
Location
Lakeland, Florida
Ok folks, the 20GMVR is almost here and this is the buy sell trade thread.

Here's how this works: you post up what you're planning on bringing to sell and what you're looking for. And commerce will commence.

Here's my lists:

I am looking for:
A pair of NOS highback M44A3 or HMMWV seats. Don't need bases.
A good whistler turbo for 2.5 ton multifuel

I am selling:
Nothing I can think of right now.
I'll be there Saturday morning with your turbo.
 

Elijah95

Certified Rookie
1,239
1,184
113
Location
Georgia
Last call folks, I have a ton of stuff still for sale and if it isn’t spoken for by tonight I don’t plan on bringing it.

Speak up if you want to buy something


Sent from my iPhone using Tapatalk
 

andy3

Member
614
12
18
Location
Suwanee, Ga
In addition to the MKT I listed earlier here are a few of the things I can bring on Saturday.

M35 Cargo tarp bows. 6 $15ea
1x of 3/4” tow bar foot for Medium tow bar. $30ea ( might have a couple sets.)
3/4’ & 1’ double tow-bar foot $50
Propellant tube with cam-lock lid $25
3x Night Vision goggle steel cases $20 ea
Soft-sided equipment bag. Makes great cooler $25
M-35 Rear frame cross member $25
Several militay batons $8 ea
M35A2 Injection pump G-Code pull $250
 

sandcobra164

Well-known member
2,999
289
83
Location
Leesburg, GA
Last minute request. Does anyone have any interest in hauling an M1102 trailer to Fort Lauderdale, Florida to the port? The gentlemen who purchased it goes by Stinkmarder on this forum and he offered me $500 to haul it. I have no interest in taking it down there but I can pull it to the Rally for free as I doubt I'd be able to calculate the additional fuel the M923 uses to pull it. It's not heavy but has a set of 24 bolt HMMWV wheels in the box and some electrical connectors so figure around 1,300 pounds. It towed fine 25 miles from the base to my house.
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks