Oil Change For My M923

[bowoods]

I need help figuring out how to change the motor oil on my M923. I did look at the TM and didn't see specific enough instruction. I have heard that I may have to detach the whole oil pan or is there a drain plug? Any help would be appreciated.

 

[doghead]

Please try to post in the appropriate forum.

Oil change is covered in the -20TM and the lube order.

 

[wheelspinner]

Did you happen to look at your truck?

 

[Cruceno]

Definitely a drain plug down there

 

[RustyM923]

Don't forget to put oil back in before you drive it.

 

[M35A2-AZ]

Yes there is a drain plug in the motor and the filter housing has a little drain plug, if it is a NHC250 motor. If it is a A2 you will only have the motor drain plug.
You do not need to remove the oil pan!!!
After you drain the motor you need to drain the filter housing with the little drain plug in it. Or you will make a big mess.

 

[bowoods]

Thanks for the feedback! It is a NHC250 motor. Thanks for the filter housing tip.

 

[bowoods]

Thank you!

 

[RustyM923]

I think what you're looking for is the lubrication order in the TM's (LO)