jag7720
New member
- 494
- 2
- 0
- Location
- Kansas City, MO
Where can I get replacement oil cooler lines? Or is there a better solution? One of mine is leaking
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
oil cooler lines
- Thread starter jag7720
- Start date
- 1,998
- 31
- 48
Might want to try LMC Truck.
jag7720
New member
- 494
- 2
- 0
- Location
- Kansas City, MO
LMC doesn't have much in the way of Diesel parts... I took a look and they have nothing for oil cooler lines
frodobaggins
Active member
- 2,861
- 16
- 38
- Location
- Ruston, La
Auto parts stores should have it.
frodobaggins
Active member
- 2,861
- 16
- 38
- Location
- Ruston, La
Bring it to NAPA, I bet they can fix you up.
POOR WHITE BOY
New member
- 220
- 2
- 0
- Location
- West Palm Beach FLORIDA
Hose is leaking or the aluminum line ?
kapnklug
Member
- 234
- 3
- 18
- Location
- spencer,ny
When I got my M1009 the flexible part of the cooler lines was leaking, and the aluminum part was worn almost thru where it passes behind the radiator shroud (unbolt the shroud at the top and check the aluminum lines on both sides). NAPA couldn't get replacements; I toyed with the idea of making new ones and using an aftermarket oil cooler, but it was getting way too complicated. I finally went with a whole new set (aluminum and flex) from GM, total cost aroud $260.
Wolf.Dose
Active member
- 1,062
- 9
- 38
- Location
- Boehl-Iggelheim, Germany
The oil cooler hoses originaly are supplied by Michelin. Official replacement is not on the market. However, the fittings are somewhat standard. So you can change to custom made hoses at your local hydraulic shop (If they are willing to do the job).
Good luck!
Wolf
Good luck!
Wolf