Pics of built up CUCVs....

[84cucv]

Hello, my name is mike been a while since i have been here. just for the fun of i would like to see your lifted, turboed etc. K5s and pickups. Just got a banks turbo for one of my CUCVs. lets see some pics thanks

 

[RSOVRanger]

6" skyjacker lift, 35's....

 

[84cucv]

Nice, mine will be kinda like yours soon.

 

[Armada]

ccattlet has his 1008 lifted with big tires, but I don't think he's taken pics yet.

 

[CCATLETT1984]

I havent taken good pics yet, although i do have some install pics on the lift. they are posted in the cucv forum. I have a shackle flip on the way to get rid of the lift block in the rear. Also have a banks kit that is getting ready to go one. will be intercooling it as well, although they say that for the low boost levels it not needed, I want to drop the egt's as much as possible. I am doing a rear disc brake conversion as soon as the brackets arrive. and the next thing on the list is to go to crossover steering.

 

[CCATLETT1984]

6" skyjacker lift, 35's....

I would love to see some better pics of the antenna setup that you have on your m1009.

 

[M1028A1ShelterCarrier]

36 swampers 4inch lift in the front

 

[84cucv]

nice, rides guys. ccattlet, your truck is going to be close to mine. I have the same plans for one of my cucvs. just need to figure out witch one.

 

[Armada]

Here's another. http://steelsoldiers.com/index.php?module=photoshare&func=showimages&fid=201

 

[RSOVRanger]

6" skyjacker lift, 35's....

I would love to see some better pics of the antenna setup that you have on your m1009.

not much to see, but when i get a chance i'll take a closeup picture.

basically it's a 18"x18" 1/4" plate with 1/4" angle iron risers/crossbar for mounting the antennas on. It also has 1 riser per side and 2 in the center that go up high enough to function as brush deflectors.

Basically the whole assembly cost me about 40-50$ to build out of the local steel rem yard. Considering my ham antenna cost $60+ the last time it got ripped off when I was wheeling (branch took it off the top of the truck and also damaged the roof/cabling when it did it) it's a small bit of satisfaction. it's bolted straight down through the pseudo-rollbar we have on these rigs. Perfect ground plane, branches get deflected, and it holds all 3 of my antennae. Ham, CB, Scanner.

 

[84cucv]

thanks armada, think i saw that on ebay. Good looking truck.

 

[Sam27]

35" swampers with just fender trim:

(okay, how do you add a picture? I browse the file and click "add attachment", but nothing happens)

 

[mangus580]

Sam, check your picture size. Must be below 640x480

 

[Sam27]

Trying again.

 

[maddawg308]

Nice ride there Sam27, but we need to get you a brushguard!

 

[Recovry4x4]

Color reminds me of Seabees truck

 

[84cucv]

that is a sweet looking truck.