Just a small modification, I hope it helps. Looking at some vid's the main weak point on the ctis wheel valve is the shrader valve. I decide to change it with a screw. It's not a completely protection, but better than nothing.
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Poor man rim (ctis wheel valve) protection
- Thread starter Plasa
- Start date
- 882
- 525
- 93
- Location
- tucson AZ
These?
coachgeo
Well-known member
- 5,150
- 3,466
- 113
- Location
- North of Cincy OH
looks to me like a broken off shrader valve
Ronmar
Well-known member
- 3,881
- 7,549
- 113
- Location
- Port angeles wa
1/16” Allen head pipe plug in place of the exposed Schrader valve…
coachgeo
Well-known member
- 5,150
- 3,466
- 113
- Location
- North of Cincy OH
same threads or did you re-thread the plug
Ronmar
Well-known member
- 3,881
- 7,549
- 113
- Location
- Port angeles wa
The port that the Schrader screws into is 1/16” NPT…
- 414
- 892
- 93
- Location
- Daytona, FL
um....why?
coachgeo
Well-known member
- 5,150
- 3,466
- 113
- Location
- North of Cincy OH
in da woods or rocks on occasion the valve stem gets ripped off. then PSSSSSssssssss your tire goes flat faster than the CTIS can keep up with it
- 414
- 892
- 93
- Location
- Daytona, FL
in theory yes...in reality our FMTV are glorified Mall Crawlers and spend 99% of thier time on paved roads with the occasional dirt road that may have a puddle... lol
and this is about as "Overland Expedition-ie" I'll ever get
- YouTube
Enjoy the videos and music you love, upload original content, and share it all with friends, family, and the world on YouTube.
youtube.com
Third From Texas
Well-known member
- 2,777
- 6,529
- 113
- Location
- Corpus Christi Texas
Seth has a video of that actually happening with Brutus. They brushed against/crushed a log or something and tore off the valve if I recall.
I've got covers on my truck and I've had some nice scrapes on them so I know they are working.
Last edited: