Post your M35A2 passenger seat upgrades

[Mrmag1]

I would love to see all the different seat and passenger seat upgrades people have done for the M35A2!

 

[98G]

My XM818 has a springer seat just like the driver's position. (Same cab as M35A2).

I put an MRAP seat on the springer base on the driver side of my M925. This should be viable for both positions of the M35A2 as well.

 

[winfred]

mine has a single place seat where the bottom flips up and the base is a box, planning on putting a evaporator and blower in it for ac, i have most of the parts but haven't built it yet past mounting the compressor

 

[59apache]

https://www.steelsoldiers.com/showthread.php?99616-Jeep-Seat-amp-Bench-for-M35

Greetings Juergen

 

[Mrmag1]

I would love to see if there is a good way to replace the whole thing with a bench seat or just as good replace the passenger seat with a small two seat bench. I have seen a few on here and on the google but no description at all.

 

[tobyS]

Installed this seat and box in my 817. Made the seat base (rigid) and significantly modified a box I got on ebay.

My M35A3 gets two of those seats. I'm still looking for the springer seat base for the passenger side and will make another console box again too.

 

[WillWagner]

I would love to see if there is a good way to replace the whole thing with a bench seat or just as good replace the passenger seat with a small two seat bench. I have seen a few on here and on the google but no description at all.

Isn't that what the ORIGINAL seat is?

 

[Mrmag1]

Isn't that what the ORIGINAL seat is?

I am sorry I meant a upgraded one.

 

[tobyS]

Kinda like a bus seat.

 

[Mrmag1]

Kinda like a bus seat.

Like the rear seat of a Jeep wrangler maybe. The existing companion seat is rather unconformable

 

[brian s]

put new seats in from old jeep

 

[tobyS]

put new seats in from old jeep

Looks like more than the seats. Did you make your console? Is your passenger on a spring base?

 

[Mrmag1]

put new seats in from old jeep

What model jeep? Did you attach them to the springer base or fab something?

 

[brian s]

Not sure of the year out of cj5 I think. Drivers side mounted to springer and right side to the stock seat bracket that way I had a base to build my center console.

 

[Mrmag1]

Not sure of the year out of cj5 I think. Drivers side mounted to springer and right side to the stock seat bracket that way I had a base to build my center console.

Neat.

 

[snowtrac nome]

For those who want exact years I have a 74 and 76 cj5 both have that style of seat I belive 72 to 80 something are all the same.