- 7,744
- 154
- 63
- Location
- Columbus Georgia
Stay tuned - no work done tonight - been up a very long time dealing with the LEO on local and Federal levels - going to eat -relax and sleep.
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Project time once again Swiss's CUCV
- Thread starter zout
- Start date
caliber1
New member
- 995
- 8
- 0
- Location
- Elcho, Wisconsin
Dang Zout, got the Christmas lights up already? Good yer teachin the squirrels how to shoot.
papabear
GA Mafia Imperial 1SG
- 13,520
- 2,464
- 113
- Location
- Columbus, Georgia
Take a well deserved rest my Brother!!
- 7,744
- 154
- 63
- Location
- Columbus Georgia
Got home on time - headed to the garage and started in full force. About 30 minutes into the work a nasty storm came through and my back yard and power line into my garage area was a water fall area. Seconds later lightening struck the power tower just away from the garage and miliseconds later I could see branches blasted off the tree's next to the drive flying towards the back of the 109 and also into the power line area. First when the power went dead I grabbed a beer and lowered down Swiss's tailgate and watched the storm - they intrique me to watch - I could see the whole lightening thing to the side of me and front of me.
I only was able to finish the drivers side fender and had almost the door done and wanting to move onto the rear - but the power went out before the show started.
its only day 5 working on it anyhow and yesterday was a day off due to work circumstances. Hope pics are clear enough - they were taken with lights out.
I only was able to finish the drivers side fender and had almost the door done and wanting to move onto the rear - but the power went out before the show started.
its only day 5 working on it anyhow and yesterday was a day off due to work circumstances. Hope pics are clear enough - they were taken with lights out.
- 2,731
- 856
- 113
- Location
- Oakwood, Ga
Crawl under the top, you will be safe 
That or turn it over and it will float like a boat, toot toot boat is a leaving.
We got nailed in Oakwood also. Great Storm, rain was totally sideways with 45 mph gusts.
That or turn it over and it will float like a boat, toot toot boat is a leaving. We got nailed in Oakwood also. Great Storm, rain was totally sideways with 45 mph gusts.
- 7,744
- 154
- 63
- Location
- Columbus Georgia
As I was sitting on the tailgate of YOUR truck drinking a beer watching the storm - that top was lifting off the ground fella
- 3,923
- 76
- 48
- Location
- Comfort, Texas
109, branches?????? In Texas we call those twigs. Drive on Commander.
papabear
GA Mafia Imperial 1SG
- 13,520
- 2,464
- 113
- Location
- Columbus, Georgia
Those tree limbs look like they fell off a tree that was weakened by a WC-22 backing into it!
- 7,744
- 154
- 63
- Location
- Columbus Georgia
For some reason under assumption I thought working on a CUCV might bring a little more interest - but it looks like there is little to no interest. Must be folks just with to use household paint instead which is not up my alley.
Seems to be more interest in posting chit that is NON MV related as well - SO
These are the last pics I am going to post and the end of this thread as far as I am concerned - I have my hands full as it is and will busier here in the next coming weeks. If Swiss wishes to post his stuff that is his decision - he will have any pics of work e mailed to him and not posted by me.
There were at least 2 coats of CARC on this outter surface - from what I could determine at least another 3 coats of Desert Tan - then the Woodland as the surface coat.
There has been previous repairs with BONDO to several area's as well including the drivers door lower section. I have the rest of the tailgate to finish - cab roof and then repairs. Whats taking so long is getting rid of the outter chitty painted surfaces - started with 180 and the rest has been 80 grit - that should give most an idea how much chit was painted onto this body. The End.
Seems to be more interest in posting chit that is NON MV related as well - SO
These are the last pics I am going to post and the end of this thread as far as I am concerned - I have my hands full as it is and will busier here in the next coming weeks. If Swiss wishes to post his stuff that is his decision - he will have any pics of work e mailed to him and not posted by me.
There were at least 2 coats of CARC on this outter surface - from what I could determine at least another 3 coats of Desert Tan - then the Woodland as the surface coat.There has been previous repairs with BONDO to several area's as well including the drivers door lower section. I have the rest of the tailgate to finish - cab roof and then repairs. Whats taking so long is getting rid of the outter chitty painted surfaces - started with 180 and the rest has been 80 grit - that should give most an idea how much chit was painted onto this body. The End.
TiggersGF
New member
- 136
- 5
- 0
- Location
- Bristol VA
Paint it pink! lol
papabear
GA Mafia Imperial 1SG
- 13,520
- 2,464
- 113
- Location
- Columbus, Georgia
I hope I'm included on the "emailed pic" list.
- 3,923
- 76
- 48
- Location
- Comfort, Texas
Boo! Boo! We want a refund. What's the matter, your shutter finger got a blister on it.
- 2,731
- 856
- 113
- Location
- Oakwood, Ga
I see we got the Budweiser contract back
papabear
GA Mafia Imperial 1SG
- 13,520
- 2,464
- 113
- Location
- Columbus, Georgia
I heard the Crown folks will be over today making a sales pitch!!I see we got the Budweiser contract back
Apparantly, their sales numbers tank when Zout is not working on a project.
phil2968
Active member
- 2,591
- 18
- 38
- Location
- Lakeland, Florida
Has of this posting this thread has had over 1000 views of 52 postings. I see plenty of interest. I may not comment on every single post or picture but I do read and look at each one. Dave, I appreciate your postings, pic uploads and progress reports. Your work inspires me to get out in this stifling Florida heat and work on my junk! I'm sure I can not be the only one that feels that way! What you do every day affects many people in ways that you may not realize.
Please continue to update this thread!
Thanks for all you do, Phillip.
- 34,012
- 1,808
- 113
- Location
- GA Mountains
Might need a belt sander for this one. Hey Swiss, is this the a/c truck that was stationed at the CAMO coumpound for a spell?
papabear
GA Mafia Imperial 1SG
- 13,520
- 2,464
- 113
- Location
- Columbus, Georgia
Negative Kenny...the "AC CUCV" is still a CAMO asset....just "detached" to an FOB...and still for sale BTW.
- 2,731
- 856
- 113
- Location
- Oakwood, Ga
Lesson to the wise, don't stop by at Zouts to check on the progress of a project. You will be put to work immediately with no mercy. Long day today, I was at Z's by 0730 with coffee and hand and could not escape till after 1400 hrs.
On valuable lesson learned is don't attack any project without the right tools I got to play with a bunch of awsome airtools.
It took all of 4 hours of sanding to get the tailgate down to green CARC. I did not appreciate how much work Commander Z can do a warp speed. We are talking cut once, cut again, cut again, cut again, do some hand sanding, cut again and then finally you start to get down to solid green paint that is embedded into the metal. Crazy hard work.
On valuable lesson learned is don't attack any project without the right tools
I got to play with a bunch of awsome airtools. It took all of 4 hours of sanding to get the tailgate down to green CARC. I did not appreciate how much work Commander Z can do a warp speed. We are talking cut once, cut again, cut again, cut again, do some hand sanding, cut again and then finally you start to get down to solid green paint that is embedded into the metal. Crazy hard work.
Attachments
Last edited:
- 3,923
- 76
- 48
- Location
- Comfort, Texas
Dassani???? Is that French for Budweiser?