• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Proper procedure for filling 8.3 engine oil

524
1
18
Location
Hamilton, NJ 08690
I've been looking over the TMs and have not been able to find the procedure for filling the engine with oil. I see the air valves that say open prior to filling. Is that all? Open the breathers and fill, close breathers, run engine?
thanks!
 

RustyM923

Member
332
7
18
Location
California
There's no vents to the oil system.

The one on top is coolant

Drivers side is fuel sampling

Passenger side on from of trans cooler is the trans fluid sampling port.


It's in the lube order (TM)
 

mcmullag

Member
919
13
18
Location
Colorado Springs, CO region
I changed the oil on mine. Nothing special, just pour the oil in, 5.5 or 5.75 gallons, cant remember. Just curious, why do you mention the dropside bed on your vehicle description, they all had that on the 923a2's but they are 14.5 ft long.
 

Mike929

Member
820
22
18
Location
DFW, Tx
Yes, correct. My truck was originally a tractor. I removed the 5th wheel hitch, and cut down a stock 14' dropside bed to fit. The shorter truck is much easier for off-roading here in the North-East.
Would definitely like to see pictures or video when you take your truck off roading. Seems to be limited video of the M931/932 tractors off road.
 
524
1
18
Location
Hamilton, NJ 08690
I do like wheelin the 5 ton but when I get it stuck, its normally quite a bit of work to get it out. So I normally stick to "light" wheelin and recovering others.
The truck behind me in these photos was a little stuck. He's on 50-something inch tractor tires and two trucks where trying to yank him out before I backed up to him and crawled out. These guys that were wheelin are NOT scared of the skinny pedal.

truck1.jpg

http://i32.photobucket.com/albums/d...0200836130454767_1149096080_n_zps017752cb.jpg

truck2.jpg

http://i32.photobucket.com/albums/d..._548607801889489_1328514515_n_zps7a4dff5a.jpg
 
Last edited by a moderator:

plode

Member
270
3
18
Location
South Jersey
I changed the oil on mine. Nothing special, just pour the oil in, 5.5 or 5.75 gallons, cant remember. Just curious, why do you mention the dropside bed on your vehicle description, they all had that on the 923a2's but they are 14.5 ft long.
Lube Order says 20 quarts with filter change on the 8.3. That's all I bought(2x2.5 gallon jugs), and am going to be changing it soon, I hope I got enough.
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks