aztec
Member
- 94
- 0
- 6
- Location
- dunnellon florida
What is the proper way to shut down my 931a2 so i dont fry anything
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Proper shut down
- Thread starter aztec
- Start date
- 14,206
- 1,573
- 113
- Location
- Dayton, OH
Shut the engine off then turn off master. I do it the same way on my M813 for practice.
- 5,920
- 4,066
- 113
Bottom switch first, then top.
Opposite for starting. Top switch first then bottom.
Think of it this way - supply power to the system, then start the motor. Shut off the motor, then power down the system.
Opposite for starting. Top switch first then bottom.
Think of it this way - supply power to the system, then start the motor. Shut off the motor, then power down the system.
- 3,745
- 1,511
- 113
- Location
- North Carolina - FINALLY !
Up up, down down.
When moving the switches up, up switch first. When moving the switches down, down switch first.
Up up, down down. Easy to remember.
When moving the switches up, up switch first. When moving the switches down, down switch first.
Up up, down down. Easy to remember.
- 5,580
- 344
- 83
- Location
- DESOTO, KANSAS
Please read the -10 operators manual, you can learn some other things about it in there also.
Alexsha
New member
- 318
- 3
- 0
- Location
- Cache Valley, UT
Don't forget your lights. But like everyone says, off is the exact reverse of on.
On: battery, engine, lights
Off: lights, engine, battery
On: battery, engine, lights
Off: lights, engine, battery
Andrmorr
Member
- 274
- 7
- 18
- Location
- Burlington, NC
Hopefully you don't let the magic smoke out of the black box the first time you forget and hit the battery switch first...If it happens it make some weird noises so don't let it throw ya...
Doug Roberts
Member
- 285
- 4
- 18
- Location
- Chapel Hill, NC
and don't forget to blow your air lines