-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
PSP landing mat-looking
- Thread starter mtnrebel
- Start date
Chief_919
Well-known member
- 2,050
- 100
- 63
- Location
- Western NC
You want aluminum, or rusted?
Chief_919
Well-known member
- 2,050
- 100
- 63
- Location
- Western NC
I don't, but these guys do.
Calumet Industries - Your Source for Landing Mats, Military Surplus, & Ammo Boxes
Calumet Industries - Your Source for Landing Mats, Military Surplus, & Ammo Boxes
skysix
Member
- 334
- 0
- 16
Those are steel
- 7,584
- 363
- 83
- Location
- Cheyenne, WY
Try SECO or Sam Weiners.
stoney_bogg
Member
- 64
- 10
- 8
- Location
- ohio
Surplus dealer in Missouri had 57 of them on E-Bay for $1800.
Just saw it by chance -dont remember the name.
Just saw it by chance -dont remember the name.
- 8,280
- 655
- 113
- Location
- Corpus Christi, TX
At first I thought ouch but in reality, that's only about $32 each. I would consider that a very acceptable price until shipping was figured in. Plus, I'm probably like most folks 57 would be a bit much. Figure 10 of them would give a 10 x 15 sq ft area in case you are setting up ops in a muddy area. I remember seeing a photo of the SAS in the desert that used them with their jeeps by taking one and cutting it in half to have 2 x 6' sections (or maybe cutting them to less than 6') to help unstick jeeps in sand.
Anyway, at $32 a piece, I'd probably buy 10 or 15---if it was close by.
Anyway, at $32 a piece, I'd probably buy 10 or 15---if it was close by.
- 12,195
- 325
- 0
- Location
- gainesville, ga.
psp = pierced steel plank
- 1,171
- 29
- 48
- Location
- Galesville, WI
I know where there is some steel Marsden mat that looks like new. How much do you want?
quickfarms
Well-known member
- 3,495
- 25
- 48
- Location
- Orange Junction, CA
Are there any sources on the west coast?
- 888
- 9
- 0
- Location
- Seattle, WA
I'd be interested if anyone can find some as close to Seattle as possible. I want at least 4, maybe as many as 8 pieces.
Let me know if someone wants to split an order / share shipping.
Storm 51
Let me know if someone wants to split an order / share shipping.
Storm 51
How much and what size are the planks?
saddamsnightmare
Well-known member
- 3,618
- 80
- 48
- Location
- Abilene, Texas
September 25th, 2013.
Depending on what you guys are looking to use the mats for, you might want to check railcar scrappers for the stainless or aluminum anti rock guards used on TTX Auto Racks, we got a bunch off of a wrecked set of auto racks for cheap, and the worked pretty well at supporting bobcats to medium trucks in mud and manure when cleaning out an old barn.....
Depending on what you guys are looking to use the mats for, you might want to check railcar scrappers for the stainless or aluminum anti rock guards used on TTX Auto Racks, we got a bunch off of a wrecked set of auto racks for cheap, and the worked pretty well at supporting bobcats to medium trucks in mud and manure when cleaning out an old barn.....
- 888
- 9
- 0
- Location
- Seattle, WA
I'm still interested in acquiring some also. Please see my post above, # 15.
Storm 51
Storm 51
Thank you for the responce.
I am not familiar with them, i will have to look into them. I need them for an F550 that i have converted to super singles Michelin XL 11x20 so they are rather narrow and the truck is rather heavy still so the planks need to be rather heavy duty. I do extensive travel with the rig and they would be either sand ladder or for what ever other purpose i would run in to.