-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Purchased MK23 with no bed sides! Anyone have any connections??
- Thread starter 737Driver
- Start date
Navy dude
Member
- 112
- 22
- 18
- Location
- Jenkintown, PA
I hear you.... looking for a tailgate myself. Sent you a message...
MTVR
Well-known member
- 698
- 756
- 93
- Location
- Waco Texas
I may be willing to sell mine, once I take delivery of my truck- the bed sides and tailgate look nice in the pictures...
Let me know! Where you located?
MTVR
Well-known member
- 698
- 756
- 93
- Location
- Waco Texas
Portland Oregon...
- 285
- 240
- 43
- Location
- Herriman UTAH
737Driver,
I can see your truck has the tail gate and ladder. You might have the bed sides stowed in the "trunk." That's what happened to my truck. When I went to pick it up, the first thing I did was open the storage under the bed and I found all the sides, the benches, and side tops in there. I was really happy.
BTW, I see that your steel cover for the storage is missing the pin that holds it on. You will want to fix that before transport or driving it any where or you will lose it and it weighs a ton. It could hurt someone if it falls off.
Jon
I can see your truck has the tail gate and ladder. You might have the bed sides stowed in the "trunk." That's what happened to my truck. When I went to pick it up, the first thing I did was open the storage under the bed and I found all the sides, the benches, and side tops in there. I was really happy.
BTW, I see that your steel cover for the storage is missing the pin that holds it on. You will want to fix that before transport or driving it any where or you will lose it and it weighs a ton. It could hurt someone if it falls off.
Jon
Thanks Jon!! I hope you are right that would be a nice surprise! Did you buy yours from the Yermo Ca site?
- 285
- 240
- 43
- Location
- Herriman UTAH
Yes, I picked mine up at Yermo. I bought it in June 2019 and back then they did not bother to put the sides on. Now I think they will take the sides out and put them on because then the truck looks better and will sell for more money. I hope your truck has the sides! Let us know.
I’ll post it as soon as I take possession!!
Jon
Would you be willing to send me the dimensions of that pin for the storage cover? I’d like to try to source one so I can have it when I pick up the truck! Maybe some pics. If you have time you can send it to jasongomora@yahoo.com I would greatly appreciate it!!
- 285
- 240
- 43
- Location
- Herriman UTAH
737Driver,
Here are the photos. Note the pin has two detent ball bearings on it that keeps it on the cover plate. Looks like the pin is a 3/8 in diameter and 2 7/8 inches long. I don't think the length is so important. You can see the ball bearing in the second photo. I think Ace Hardware might have something like this.
Here are the photos. Note the pin has two detent ball bearings on it that keeps it on the cover plate. Looks like the pin is a 3/8 in diameter and 2 7/8 inches long. I don't think the length is so important. You can see the ball bearing in the second photo. I think Ace Hardware might have something like this.
- 285
- 240
- 43
- Location
- Herriman UTAH
I was running some errands today and I drove by a Ace Hardware so I stopped. I found a pin that may work. It has just one ball bearing to retain it but it might work.
MTVR
Well-known member
- 698
- 756
- 93
- Location
- Waco Texas
737Driver, we took delivery of our truck today. The tailgate and bed sides are in surprisingly good shape. They are not perfect, but they are the nicest ones I've ever seen. I think the only way you'll be able to find nicer ones, would be to buy brand new ones and have them painted. You can PM me if you're still interested... 
- 285
- 240
- 43
- Location
- Herriman UTAH
MTVR,
Do you have the ladder? I am interested in getting one.
Jon
Sent from my SM-G988U1 using Tapatalk
Do you have the ladder? I am interested in getting one.
Jon
Sent from my SM-G988U1 using Tapatalk
MTVR
Well-known member
- 698
- 756
- 93
- Location
- Waco Texas
I do not have the ladder...
I’m still interested! How did u take dilivery gov planet told me all EUC were on hold due to the virus?? I’d love to talk when you get a chance on how that all went down! Did you get yours from Yermo?737Driver, we took delivery of our truck today. The tailgate and bed sides are in surprisingly good shape. They are not perfect, but they are the nicest ones I've ever seen. I think the only way you'll be able to find nicer ones, would be to buy brand new ones and have them painted. You can PM me if you're still interested...
Thanks Jason 303-775-7329
MTVR
Well-known member
- 698
- 756
- 93
- Location
- Waco Texas
It was good to talk to you on the phone, Jason...
Jon
Don’t know if this helps or not, kind of pricey but put an offer in at lower price!!
Most boarding ladders cost a left n... especially if they are related to an LMTV or MTVR. Buy one for an M1070 from member @Suprman For $120 nd modify it for use. Such as lock drops for the bolt holes on the ladder.
