• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Question about windshield gaskets

spankybear

Well-known member
898
924
93
Location
WA
I went out and spent big bucks on a new windshield gasket. When UPS finally got it here I see it's not the same as the one that was on the windshield. There is no corner molded in to the gasket like the picture below. It looks like the profile is the same just no molded corner. So my question is will the one with the corner seal better than the one without? I have been looking at pictures of LMTV windshields and it seem over half the ones I looked at have the molded corner. Any thoughts on this?

20200427192631_IMG_0197.JPG
 

jkcondrey

Active member
Steel Soldiers Supporter
317
141
43
Location
Rutherfordton, NC
Not sure Ill be much help, but my gaskets do not have that profile in the corner either. I have an LVAD, so it may be different style.
 

Berend

Active member
Steel Soldiers Supporter
135
78
28
Location
Netherlands
I went out and spent big bucks on a new windshield gasket. When UPS finally got it here I see it's not the same as the one that was on the windshield. There is no corner molded in to the gasket like the picture below. It looks like the profile is the same just no molded corner. So my question is will the one with the corner seal better than the one without? I have been looking at pictures of LMTV windshields and it seem over half the ones I looked at have the molded corner. Any thoughts on this?

View attachment 798048
If you don’t mind me asking , how much was the gasket and where did you get it ?


Verzonden vanaf mijn iPhone met Tapatalk
 

spankybear

Well-known member
898
924
93
Location
WA
Tax and shipping was 355 bucks (USD). I got it from SECO... I will not buy from them again. Their website said it was 312 plus shipping but they charged me 318..00 plus tax and shipping. They have an ebay listing for 322.00 plus like 19.00 shipping and tax.

I should have just used the old one. There are a couple of tears in the old gasket that I fixed. I just don't want any leaks as i did some rust repair along the window opening.

I guess you can get them over in Europe From Styer but I could not find anyplace to get them.
 

Suprman

Well-known member
Supporting Vendor
6,861
697
113
Location
Stratford/Connecticut
I have the steyr part number. Just as expensive though. I have been hunting for a generic. Has to be something out there. I can get the windshields from the manufacturer cheap.
 

Ronmar

Well-known member
3,881
7,549
113
Location
Port angeles wa
The only benefit I can see with the molded corners is it allows the outer/surface lip seal to lay out a little flatter against the skin on the lower corners. Probably not a big deal... as there are several lip seals that contact the body down in the window recess/opening...
 

Reworked LMTV

Expedition Campers Limited, LLC
Supporting Vendor
1,511
1,178
113
Location
TN
keep your windshield gasket treated with ATP 205 for future changes.
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks