Average Joe
New member
- 12
- 0
- 1
- Location
- Colorado Springs, CO
While I was adding the frame extensions to my truck (M35A2C) for installing a winch, one of the radiator fan blades fell out of the body. This leads me to conclude that a new fan is needed. I've been able to find 19"+ fans, but none have an 1&1/2" pilot bearing hole in the center. Does anyone know of a more modern, lightweight fan that will bolt up, or is there a spacer that will allow a modern fan to mount up correctly?
Auch, now that the radiator is drained of all its blood, I'm noticing how rusty the water pump is. I can't find a leak, but I shudder to think what the impeller looks like. Should I break the pump apart and check, or just replace the whole shooting match?
AvgJoe![ImageUploadedByTapatalk1340865051.402105.jpg ImageUploadedByTapatalk1340865051.402105.jpg](https://www.steelsoldiers.com/data/attachments/248/248715-ecee1a1da2664e4c6eb905845dacc7ec.jpg)
Auch, now that the radiator is drained of all its blood, I'm noticing how rusty the water pump is. I can't find a leak, but I shudder to think what the impeller looks like. Should I break the pump apart and check, or just replace the whole shooting match?
AvgJoe
![ImageUploadedByTapatalk1340865051.402105.jpg ImageUploadedByTapatalk1340865051.402105.jpg](https://www.steelsoldiers.com/data/attachments/248/248715-ecee1a1da2664e4c6eb905845dacc7ec.jpg)