Kharville
Member
- 61
- 0
- 6
- Location
- Clinton LA
I've just torn into my rear-rear axle due to some oil-washed bearings and grease on the pads. Upon following all the instructions of re-assembly everything looks good but unlike the front, the outer seal on the rear seems to cause the hub to not spin as freely as the front. Is this normal? I have adjusted my brakes and they are not dragging. As I tightened the inner nut to 50ft/lbs and then backed off I noticed that it was more tedious to turn. It may just be my perception.![Confused :-? :-?](https://www.steelsoldiers.com/images/smilies/icon_confused.gif)
![Confused :-? :-?](https://www.steelsoldiers.com/images/smilies/icon_confused.gif)