10isBestmm
Member
- 52
- 45
- 18
- Location
- San Antonio, Texas
Encountered a problem I havent noticed till I engaged the 2 to 7 ton mode on the truck.
Rears normally run 35psi unloaded and 55 psi when in 7 ton mode.
Never really had a need until recently testing a trailer and having a 3 ton container put onto the bed.
Engaged in 7 ton mode and the passenger mid rear tire starts goes from 35psi to 55psi then back down to 35 psi, with the air escaping from what I assume is a bypass on the passenger side steps.
Great help from Elijah on helping me pinpoint the problem hopefully to this seal on the tire ctis. It was completely eroded and now im hoping the new one in the mail will solve my problem.
When taking off the cover, all 4 of the screws sheared off and a powder immediately came out of the cover. The gasket was ragged and eaten at the edges.
Rears normally run 35psi unloaded and 55 psi when in 7 ton mode.
Never really had a need until recently testing a trailer and having a 3 ton container put onto the bed.
Engaged in 7 ton mode and the passenger mid rear tire starts goes from 35psi to 55psi then back down to 35 psi, with the air escaping from what I assume is a bypass on the passenger side steps.
Great help from Elijah on helping me pinpoint the problem hopefully to this seal on the tire ctis. It was completely eroded and now im hoping the new one in the mail will solve my problem.
When taking off the cover, all 4 of the screws sheared off and a powder immediately came out of the cover. The gasket was ragged and eaten at the edges.
