dk8019
Active member
- 797
- 52
- 28
- Location
- Lovettsville, VA
Well I replaced the primary water seperator / filter on the M814 today, it's about done and ready to start working, and as I was reading through the -20, I found that there's a smaller filter inside the IP that needs replacing as well. ODIron didn't have these when I bought my fuel filter before, so where does one find these, and how often do they need replaced?
The M814 was sitting for quite a long time before I picked it up, if I had to guess, I would say 4-5 years. The tank was full so, I treated it, and have ran it so far, it does ok, but the primary filter was nasty, and I believe stuff was living in the filter body.![Sad :-( :-(](https://www.steelsoldiers.com/images/smilies/icon_sad.gif)
Changed the oil as well, pretty nasty looking to say the least!
She's painted after the bad spots being taken care of which were few. The inside of the bed needed the most attention. I think standing water had been in the back for quite awhile. I'll have pictures up as soon as the replacement windshields are installed!
The M814 was sitting for quite a long time before I picked it up, if I had to guess, I would say 4-5 years. The tank was full so, I treated it, and have ran it so far, it does ok, but the primary filter was nasty, and I believe stuff was living in the filter body.
![Sad :-( :-(](https://www.steelsoldiers.com/images/smilies/icon_sad.gif)
Changed the oil as well, pretty nasty looking to say the least!
She's painted after the bad spots being taken care of which were few. The inside of the bed needed the most attention. I think standing water had been in the back for quite awhile. I'll have pictures up as soon as the replacement windshields are installed!