Travis89xj
Member
- 174
- 0
- 18
- Location
- Gainesville, Florida
For the guys that have running driving growlers, is there any visible part numbers for the starter or axle shafts on your trucks?
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Respectfully suggest a Growler forum as well.
- Thread starter Lionel
- Start date
m1161
Member
- 54
- 31
- 18
- Location
- Hackettstown NJ
Good Morning,
I have a 2nd M1161 a 2012 very clean unit but the starter solenoid was fried due to a small relay in a cluster above the brake pedal. I pulled the started and it has absolutely no markings on it. My son, through contacts, is arranging to buy one thru folks in either Paraguay or Brazil. The differentials are FoMoCo or, I presume Ford Motor Co. There's a long number, not at hand, on the rear unit and the markings SYNTH 75W140 The differential's lubricant. Another mark is CAV21 However the front differential number is obscured by frame structure and is a CAV20. The M151 I have has interchangeable front and rear differentials...that may be too much to hope for here as per the "20" and "21" CAV numbers. I'll reply to this list if I have any results on the mysterious starter.
I have a 2nd M1161 a 2012 very clean unit but the starter solenoid was fried due to a small relay in a cluster above the brake pedal. I pulled the started and it has absolutely no markings on it. My son, through contacts, is arranging to buy one thru folks in either Paraguay or Brazil. The differentials are FoMoCo or, I presume Ford Motor Co. There's a long number, not at hand, on the rear unit and the markings SYNTH 75W140 The differential's lubricant. Another mark is CAV21 However the front differential number is obscured by frame structure and is a CAV20. The M151 I have has interchangeable front and rear differentials...that may be too much to hope for here as per the "20" and "21" CAV numbers. I'll reply to this list if I have any results on the mysterious starter.
Travis89xj
Member
- 174
- 0
- 18
- Location
- Gainesville, Florida
M1161 that would be awesome if you do find anything. I would like to get this this running so I can have some fun haha.
m1161
Member
- 54
- 31
- 18
- Location
- Hackettstown NJ
FWIW, I spoke to my IT person and he said no problem on setting up a Growler / M1161/3 forum.
We'll do that shortly if there's no interest on the steelsoldier's part. Presently I find it difficult
to navigate this forum for Growler information....IT is my nemesis.
We'll do that shortly if there's no interest on the steelsoldier's part. Presently I find it difficult
to navigate this forum for Growler information....IT is my nemesis.
cpotato2001
New member
- 24
- 0
- 1
- Location
- Papillion, Nebraska
I am going to try to own one of these tomorrow.. wish me luck, and I hope we don't bid against each other!!
- 14,639
- 4,820
- 113
- Location
- Buchanan, GA
There will be a growler forum added soon. Been focused on the migration.
- 14,639
- 4,820
- 113
- Location
- Buchanan, GA
And here it is:
Please report any existing threads we need to move into there.
Please report any existing threads we need to move into there.