Return fuel line Fittings

[yolner]

I agree here is what i bought from McMaster when i did mine. I did not use all of it so if your on a tight budget you don't have to order all this.

1. 5097T61825 Ft.D.o.t. Choose-a-color Nylon Tubing For Air, Nonreinforced,.17"id,1/4"od, .040"wall,yellow,25'
2. 5097T66225 Ft.D.o.t. Choose-a-color Nylon Tubing For Air, Reinforced,.251"id, 3/8"od,.062"wall, Yellow, 25'
3. 51835K2811 PackBrass Dot Compression Tube Fit For Nylon Tube, Sleeve For 1/4" Tube Od
4. 51835K2821 PackBrass Dot Compression Tube Fit For Nylon Tube, Sleeve For 3/8" Tube Od
5. 51835K2911 PackBrass Dot Compression Tube Fit For Nylon Tube, Nut For 1/4" Tube Od
6. 51835K2921 PackBrass Dot Compression Tube Fit For Nylon Tube, Nut For 3/8" Tube Od
7. 8359K11325 Ft.High-strength Clear Nylon Tubing, .096" Id, 1/8" Od, .014" Wall Thickness, 25'
8. 50915K2411 PackCopper Tube Support For 1/8" Tube Od
9. 50915K2451 PackStandard Brass Compression Tube Fitting, Tube Support For 3/8" Tube Od
10. 50915K2431 PackStandard Brass Compression Tube Fitting, Tube Support For 1/4" Tube Od

Thanks! I hope you don't mind me making it a bit easier to read.

EDIT: Hah just realized that post is from 2011, but it's still easier to read.

 

[rustystud]

View attachment Scan.pdfHere is the correct fittings from "Parker" . There called " Hi-Duty Flareless Tube Fittings " . Here's the pages from the catalog describing the fittings. Sorry the description page came in upside down. You will still need the inserts too.

 

[WillWagner]

McMaster sells the correct fitting for the line, I posted on this years ago. Somewhere around here I have a bag full of them. I'll dig them up. Although they MIGHT have gone with the truck, but I think I have seen them since, who knows. CRS!

 

[rustystud]

I'm just saying these are the original from my original nonrebuilt engine. I took them to a Hydraulic specialty shop and they matched mine by fittings and number. If the ones by McMaster work, that's fine.