Rocwell W/CTIS

[sermis]

I found a rockwell axel at a salvage wholsale company. It is used but in a wooden crate. Has a rebuild service tag but did not get the info from it. Too dark for PIC's in the wearhouse. It looks like a deuce axel. Has 6 lug pattern. It also has a CTIS inflation system. What would the axel have been on?
They want $200 for it.

 

[M1075]

Sounds like M35A3.

 

[Big Mike's Motor Pool]

you should buy it and ebay it if you dont need it.

 

[40grit]

CTIS alone should be worth more than $200.
worth way more than $200 if it's a front...
get it and sell it like mudlord says if you don't need it...

 

[Big Mike's Motor Pool]

i wish i had ctis on my truck, i use it in alot of sandy areas. its a real pain to deflate and inflate the tires all the time

 

[emmado22]

CTIS is great. until it stops working....

 

[bottleworks]

Did any CTIS "kits" ever get into surplus? Is there an upgrade TM for it (like the dual brake circuit system TM)?

 

[emmado22]

There is no CTIS kit, nor dual brake kit. They are factory installed stuff only.

 

[gringeltaube]

....Too dark for PIC's in the wearhouse...

...and before you sell or install it, please don't forget to take the pics...!

wish I could ever see one disassembled!

 

[bottleworks]

There is no CTIS kit, nor dual brake kit. They are factory installed stuff only.

Both systems came on the M35A3. It's my understanding that A3's are rebuilds of A2's, not a factory produced product.

 

[emmado22]

There is no "add on kit" you can requistion and add CTIS or dual brakes to a M35A2..


Where do you think they rebuilt the A2's into A3's? AMG's factory.

 

[sermis]

It is a rear axel. The hubs are flipped so I guess A3. What is it worth? Worth me going and getting it?

 

[M1075]

It might be worth $200 if someone has an A3 and needs CTIS parts. Since they are few and far between in private hands, it might be a risky proposition. Rear axles are usually pretty cheap.

 

[bottleworks]

Where do you think they rebuilt the A2's into A3's? AMG's factory.

Interesting. I just figured that the modifications to make an A2 into an A3 were done at an Army rebuild depot.

 

[Maverick1701]

Interesting. I just figured that the modifications to make an A2 into an A3 were done at an Army rebuild depot.

that makes two of us....I learned something new today.

 

[AceHigh]

Interesting. I just figured that the modifications to make an A2 into an A3 were done at an Army rebuild depot.

I think some were AM General and some depot projects.

 

[wbdodgeiv]

Having never looked at the CTIS system up close, can take off parts be used to put CTIS on a normal A2? I would like to get air to the wheels not to inflate the tires but to shift an unlocker.

 

[flyxpl]

Having never looked at the CTIS system up close, can take off parts be used to put CTIS on a normal A2? I would like to get air to the wheels not to inflate the tires but to shift an unlocker.

It would be much more simple to just tap into the existing air on the truck and use a switch and a seliniod to activate a locker .

 

[wehring]

I have one...

I have an m35a3 axle with ctis for sale. Check the sale section for "wehrings red ass sale"
it came off of an exc cond a3 that I bobbed.

Justin wehrings
979 997 3112

 

[trukhead]

That rear axle...

I oculd use that rear axle. I was going to install rockwells under a m1008 and to get the rear and wheels and ctis I was going to buy and bob an m35a3 and swipe the spare wheel from my m35a3 and the bob spare wheel. so ....