wildbill88
New member
- 20
- 3
- 3
- Location
- Illinois
Do you have. Casting number for that arm? Or a part number thanks
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Ross HF54 Power Steering in my Deuce
- Thread starter Seth_O
- Start date
WB,
iirc there is a casting number on the arm. Unfortunately I am away from my truck for a while, so can't walk out to look at it. Sorry
. There are two different arms available, one is shorter than the other. You want the shorter one. PM gringeltaube - he is the guru of all things Ross PS and may be able to help you.
- 6,888
- 2,274
- 113
- Location
- Montevideo/Uruguay
Check your mailbox; I've sent you that info, yesterday. Also the TM for the HF54 you wanted.
This......
G.
Attachments
59apache
Chipmaker
- 1,299
- 29
- 48
- Location
- Bavaria / Germany
If you're shopping for a HF54 look for a version with full spline and full grove shaft.....
a good place with good infos is srtp.us
They are very helpfull.
Mr. G is the best
a good place with good infos is srtp.us
They are very helpfull.
Mr. G is the best
Last edited:
brianp454
Member
- 572
- 11
- 18
- Location
- Portland, OR
brianp454
Member
- 572
- 11
- 18
- Location
- Portland, OR
I'm new to the idea of a power steering conversion.
I found this at a local scrap yard and could get it cheap.
Is this a sample of the steering ram you are referring to?
I could go by and take some measurements.
It looks like it would bolt right up on the crosslink and would need a simple bracket to mount to the axle housing or frame somehow.
I found this at a local scrap yard and could get it cheap.
Is this a sample of the steering ram you are referring to?
I could go by and take some measurements.
It looks like it would bolt right up on the crosslink and would need a simple bracket to mount to the axle housing or frame somehow.