srodocker
Well-known member
- 6,549
- 68
- 48
- Location
- Lacey, Washington
thats awesome!
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Guilty as charged...but I do have a Navy tube test set (CY-703A/U) that a friend gave me to keep in there!Pictures look good, very high tech. But I don't see a single vacuum tube in there.![]()
I agree; quality construction throughout! I bought a rivnut hand-tool early on in the project that proved to be a good investment. Not as much power as the pneumatic ones of course, but a lot cheaper. Rivnuts hold a LOT better than sheet metal screws whre it counts. You can find RV windows cheap on ebay too if you want some light, and if you keep it to 16" wide, you won't have to cut through a metal stud either.Professor, that is one beautiful set-up you designed there. I'm workin on a 250 I recently got off Hawkman that will be made into my mobile 'Hooch'.
Unlike yours, I'm stripping everything out of mine, then will build in a fold-up bed, closet, and a small cooking bench area.
I've been drilling out rivets for three weeks and removing the conduit & fixtures. The tin used has my hands & fingers about shredded, but it all should be out this weekend.
They are certainly well built....
Thanks for shareing and job well done..![]()