schematic in the 361-20 manual

[Peter Bog]

Ok guy's I redrew the Schematic from the 20 manual except the 100 amp stuff, what size would be good for you? up to 36"x 500' lol
sorry Recovry 4x4 I dont want to stell your thunder, I could print them out for free (a few each day)

let me know what you think I would like to give some thing bace to the bord for some much help

 

[Recovry4x4]

Go for it Peter. Saves me a big trip to the printers. Your efforts will be recognized brother!

 

[SixBuy]

Which way did those repros go and what must one do to gat a hold of it?

 

[Peter Bog]

I made up a 22"x36" and a 11"x17" any smaller the text and stuff would get lost. I'm going to make a maylar copy and a paper copy of the 22x36 and a paper copy and a maylar copy of the 11x17.
if Intersted email me @ peterbog1@yahoo.com

 

[rdixiemiller]

Peter
Are these in AutoCAD? Or have you redrawn them by hand?

 

[Peter Bog]

rdixiemiller
Yes thay are in acad, the pdf file was alittle to large so the ploter didn't like it to much (took about 20 min. to plot out one) and some of the numbers were hard to read, so I redrew it in cad to make my life easer.

If any body wants the dwg file I can just email to them

 

[Desert Rat]

Could I put in a request?

 

[Peter Bog]

Hay Desert Rat it would be my pleasure. did you want the file or hard copies? if you want the hard copies just shoot me the mailing adress, and I will mail it out, the only thing I ask is the shipping cost

 

[Desert Rat]

Give me a quote on shipping to Fort Branch, IN 47648

 

[Peter Bog]

Desert Rat
It is like $5.00

 

[Desert Rat]

PM me your address and I'll send a check.

 

[rflegal]

Good work would like a copy of that ACAD file please, have access to a large format printer...


rflegal@sprynet.com



Thanks

Bob

 

[rdixiemiller]

I could also use the DWG file. I have AutoCAD 2004 LT, so as long as it is not later than that I can open it.

 

[Desert Rat]

Peter,
I'm still waiting to get your PM.

 

[MVtrucker]

Pete and Pete, yes, two of them, were here this morning to get truck parts. Pete (Peter Bog) brought me down some of those schematic "drawings" he made. You will be impressed! Especially by the large Mylar ones. Pete used the word redrew and I thought be took a pencil and a rule and hand drew them. Wrong. These are professional. Get 'em while they last!

 

[Peter Bog]

[color=orange>sorry]
sixbuy[/color]

[color=orange>I]

<FONT color=orange>I and I have the shipping tubes at work so I will mail them out on tuesday and let every body know about the final shipping cost[/color]

<FONT color=orange>I'm glad you liked them Joe

 

[MVtrucker]

Peter,
You're welcome. I am definitely impressed by them! Like I told you, they're fir for framing and hanging on a wall in my office.
edited: fir should read fit. I make it sound like fir, as in wood, to make frames.

 

[SixBuy]

Peter,
After Joe's accolades, I can't wait to see... But that's ok - I'll be busy installing all that stuff I bought from Joe!

 

[MVtrucker]

Yep, you have some work to do!

 

[Loose Deuce]

Pardon Me but what are you guys talking about ? Is it some kind of wiring diagram?